Import Configuration - Revision history

Melinda Caroline: Redirected page to XFRACAS XML Import Documentation

2015-07-27T23:57:29Z

Redirected page to XFRACAS XML Import Documentation

← Older revision		Revision as of 23:57, 27 July 2015
Line 1:		Line 1:
	~~{{Template:XFRACAS.XML.Import.Doc.Class\|Import Configuration\|Import Configuration}}~~		#REDIRECT[[XFRACAS_XML_Import_Documentation]]
	The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.

	<[[~~Import Configuration\|ImportConfiguration]]>~~
	~~<[[BatchInsert]]></[[BatchInsert]]>~~
	~~<[[SplitTransaction]]></[[SplitTransaction]]>~~
	~~<[[EnableUpdate]]></[[EnableUpdate]]>~~
	~~<[[UpdateOnly]]></[[UpdateOnly]]>~~
	~~<[[InsertDetailIssues]]></[[InsertDetailIssues]]>~~
	~~</[[Import Configuration\|ImportConfiguration]]>~~


	~~===XML Elements===~~
	* [[BatchInsert]]
	* [[SplitTransaction]]
	* [[EnableUpdate]]
	* [[UpdateOnly]]
	* [[InsertDetailIssues]]
	* [[InsertIncidentIssues]]

John Leavitt at 23:57, 12 February 2015

2015-02-12T23:57:28Z

← Older revision		Revision as of 23:57, 12 February 2015
Line 17:		Line 17:
	* [[UpdateOnly]]		* [[UpdateOnly]]
	* [[InsertDetailIssues]]		* [[InsertDetailIssues]]
			* [[InsertIncidentIssues]]

John Leavitt at 14:33, 19 September 2014

2014-09-19T14:33:59Z

← Older revision		Revision as of 14:33, 19 September 2014
Line 2:		Line 2:
	The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.		The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.

	<[[ImportConfiguration]]>		<[[Import Configuration\|ImportConfiguration]]>
	<[[BatchInsert]]></[[BatchInsert]]>		<[[BatchInsert]]></[[BatchInsert]]>
	<[[SplitTransaction]]></[[SplitTransaction]]>		<[[SplitTransaction]]></[[SplitTransaction]]>
Line 8:		Line 8:
	<[[UpdateOnly]]></[[UpdateOnly]]>		<[[UpdateOnly]]></[[UpdateOnly]]>
	<[[InsertDetailIssues]]></[[InsertDetailIssues]]>		<[[InsertDetailIssues]]></[[InsertDetailIssues]]>
	</[[ImportConfiguration]]>		</[[Import Configuration\|ImportConfiguration]]>

John Leavitt at 14:33, 19 September 2014

2014-09-19T14:33:20Z

← Older revision		Revision as of 14:33, 19 September 2014
Line 2:		Line 2:
	The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.		The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.

	<ImportConfiguration>		<[[ImportConfiguration]]>
	<BatchInsert></BatchInsert>		<[[BatchInsert]]></[[BatchInsert]]>
	<SplitTransaction></SplitTransaction>		<[[SplitTransaction]]></[[SplitTransaction]]>
	<EnableUpdate></EnableUpdate>		<[[EnableUpdate]]></[[EnableUpdate]]>
	<UpdateOnly></UpdateOnly>		<[[UpdateOnly]]></[[UpdateOnly]]>
	<InsertDetailIssues></InsertDetailIssues>		<[[InsertDetailIssues]]></[[InsertDetailIssues]]>
	</ImportConfiguration>		</[[ImportConfiguration]]>

John Leavitt at 14:27, 19 September 2014

2014-09-19T14:27:48Z

← Older revision		Revision as of 14:27, 19 September 2014
Line 1:		Line 1:
	{{Template:XFRACAS.XML.Import.Doc.Class\|~~XFRACAS XML~~ Import ~~Documentation~~\|~~XFRACAS XML~~ Import ~~Documentation~~}}		{{Template:XFRACAS.XML.Import.Doc.Class\|Import Configuration\|Import Configuration}}
	The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.		The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.

John Leavitt at 14:27, 19 September 2014

2014-09-19T14:27:02Z

← Older revision		Revision as of 14:27, 19 September 2014
Line 1:		Line 1:
	{{Template:XFRACAS.XML.Import.Doc.Class\|~~Common Elements~~\|~~Common Elements~~}}		{{Template:XFRACAS.XML.Import.Doc.Class\|XFRACAS XML Import Documentation\|XFRACAS XML Import Documentation}}
	The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.		The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.

John Leavitt at 14:23, 19 September 2014

2014-09-19T14:23:52Z

← Older revision		Revision as of 14:23, 19 September 2014
Line 9:		Line 9:
	<InsertDetailIssues></InsertDetailIssues>		<InsertDetailIssues></InsertDetailIssues>
	</ImportConfiguration>		</ImportConfiguration>


			===XML Elements===
			* [[BatchInsert]]
			* [[SplitTransaction]]
			* [[EnableUpdate]]
			* [[UpdateOnly]]
			* [[InsertDetailIssues]]

John Leavitt at 23:09, 18 September 2014

2014-09-18T23:09:10Z

← Older revision		Revision as of 23:09, 18 September 2014
Line 1:		Line 1:
	{{Template:XFRACAS.XML.Import.Doc.Class\|Common Elements\|Common Elements}}		{{Template:XFRACAS.XML.Import.Doc.Class\|Common Elements\|Common Elements}}
	The ~~ImportConfiguarration~~ element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc)~~IncidentIncidents element~~. The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also ~~haveas~~ additional elements specifically for that import.		The ImportConfiguration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc). The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also have additional elements specifically for that import.

	<ImportConfiguration>		<ImportConfiguration>
Line 7:		Line 7:
	<EnableUpdate></EnableUpdate>		<EnableUpdate></EnableUpdate>
	<UpdateOnly></UpdateOnly>		<UpdateOnly></UpdateOnly>
	<InsertDetailIssues></InsertDetailIssues>		<InsertDetailIssues></InsertDetailIssues>
	</ImportConfiguration>		</ImportConfiguration>

John Leavitt: Created page with '{{Template:XFRACAS.XML.Import.Doc.Class|Common Elements|Common Elements}} The ImportConfiguarration element is used to specify import settings and should be placed below the Exp…'

2014-09-18T23:07:53Z

Created page with '{{Template:XFRACAS.XML.Import.Doc.Class|Common Elements|Common Elements}} The ImportConfiguarration element is used to specify import settings and should be placed below the Exp…'

New page

{{Template:XFRACAS.XML.Import.Doc.Class|Common Elements|Common Elements}}
The ImportConfiguarration element is used to specify import settings and should be placed below the ExportData or Resources element if present and above the first import type element (Incident, Problem, etc)IncidentIncidents element. The Import Configurations are optional and if present must be “Yes” or “No.” The elements below are available on every import type. Each import may also haveas additional elements specifically for that import.

<ImportConfiguration>
<BatchInsert></BatchInsert>
<SplitTransaction></SplitTransaction>
<EnableUpdate></EnableUpdate>
<UpdateOnly></UpdateOnly>
<InsertDetailIssues></InsertDetailIssues>
</ImportConfiguration>