Template:Example: Warranty Analysis Nevada Format Example - Revision history

Lisa Hacker: Redirected page to Warranty Data Analysis

2012-08-13T02:41:45Z

Redirected page to Warranty Data Analysis

← Older revision		Revision as of 02:41, 13 August 2012
Line 1:		Line 1:
	[[~~Category: For Deletion~~]]		#REDIRECT [[Warranty_Data_Analysis]]

Kate Racaza: content merged with page: Warranty_Data_Analysis

2012-07-26T06:11:33Z

content merged with page: Warranty_Data_Analysis

← Older revision		Revision as of 06:11, 26 July 2012
Line 1:		Line 1:
	~~'''Warranty Analysis Nevada Format Example'''~~		[[Category: For Deletion]]

	A company keeps track of its shipments and warranty returns on a month-by-month basis. The data format that the company uses is the Nevada format. Following is a table for shipments in June, July, and August, and the warranty returns through September:


	~~{\|align="center" border="1" cellspacing="1"~~
	~~\|-align="center"~~
	~~\|colspan="2"\| \|\|colspan="3" style="text-align:center;"\|RETURNS~~
	~~\|-align="center"~~
	~~\|colspan="2" style="text-align:right;"\|SHIP\|\|Jul. 2010\|\|Aug. 2010\|\|Sep. 2010~~
	~~\|-align="center"~~
	~~\|Jun. 2010\|\|100\|\|3\|\|3\|\|5~~
	~~\|-align="center"~~
	~~\|Jul. 2010\|\|140\|\|-\|\|2\|\|4~~
	~~\|-align="center"~~
	~~\|Aug. 2010\|\|150\|\|-\|\|-\|\|4~~
	\|}


	~~Convert this information to life data, and determine the parameters for a two-parameter Weibull distribution.~~


	~~'''Solution'''~~

	We will examine the data month by month. In June 100 units were sold, and in July 3 of these units were returned. This gives 3 failures at one month for the June shipment, which we will denote as <math>{{F}_{JUN,1}}=3</math> . Likewise, 3 failures occurred in August and 5 occurred in September for this shipment, or <math>{{F}_{JUN,2}}=3</math> and <math>{{F}_{JUN,3}}=5</math>. Consequently, at the end of our three-month analysis period, there were a total of 11 failures for the 100 units shipped in June. This means that 89 units are presumably still operating, and can be considered suspensions at three months, or <math>{{S}_{JUN,3}}=89</math>. For the shipment of 140 in July, 2 were returned the following month, or <math>{{F}_{JUL,1}}=2</math> , and 4 more were returned the month after that, or <math>{{F}_{JUL,2}}=4</math>. After two months, there are 134 ( <math>140-2-4=134</math> ) units from the July shipment still operating, or <math>{{S}_{JUL,2}}=134</math>. For the final shipment of 150 in August, 4 fail in September, or <math>{{F}_{AUG,1}}=4</math>, with the remaining 146 units being suspensions at one month, or <math>{{S}_{AUG,1}}=146</math>.

	~~It is now a simple matter to add up the number of failures for 1, 2, and 3 months, then add the suspensions to get our reliability data set:~~


	~~<center><math>\begin{matrix}~~
	~~\text{Failures at 1 month:} & {{F}_{1}}={{F}_{JUN,1}}+{{F}_{JUL,1}}+{{F}_{AUG,1}}=3+2+4=9 \\~~
	~~\text{Suspensions at 1 month:} & {{S}_{1}}={{S}_{AUG,1}}=146 \\~~
	~~\text{Failures at 2 months:} & {{F}_{2}}={{F}_{JUN,2}}+{{F}_{JUL,2}}=3+4=7 \\~~
	~~\text{Suspensions at 2 months:} & {{S}_{2}}={{S}_{JUL,2}}=134 \\~~
	~~\text{Failures at 3 months:} & {{F}_{3}}={{F}_{JUN,3}}=5 \\~~
	~~\text{Suspensions at 3 months:} & {{S}_{JUN,3}}=89 \\~~
	~~\end{matrix}</math></center>~~

	~~To perform this analysis in Weibull++, create a warranty analysis folio and choose '''I want to enter data in Nevada format''' in the Project Wizard.~~

	[[~~Image~~:~~warrantyan.png\|thumb\|center\|500px\| ]]~~

	~~[[Image:warrantynevada.png\|thumb\|center\|500px\| ]]~~

	~~The next window allows you to specify the time units used.~~ For this example select '''Months''' under '''I want to use the following unit type for each period''' and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:

	~~[[Image:Warranty Example 1 Setup.png\|thumb\|center\|500px\| ]]~~

	~~The sales data are entered as follows:~~

	~~[[Image:Warranty Example 1 Sale.png\|thumb\|center\|500px\| ]]~~

	~~The return data are entered as follows:~~

	~~[[Image:Warranty Example 1 Return.png\|thumb\|center\|500px\| ]]~~

	The data can now be analyzed. Select 2-parameter Weibull as the distribution type and MLE as the analysis method and click the '''Calculate''' button. The estimated parameters are <math>\widehat{\beta }=2.49</math> and <math>\widehat{\eta }=6.70.</math>

	Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the '''Transfer Life Data to New Folio''' button:

	~~[[Image:transferdata2folio.png\|center\|400px ]]~~
	~~<math></math>~~


	~~or choosing this option under the Data menu.~~

	~~The equivalent Times-to-failure folio is as follows:~~

	~~[[Image:Warranty Example 1 Standard Folio Data.png\|thumb\|center\|500px\|~~ ]]

Chris Kahn at 19:11, 21 May 2012

2012-05-21T19:11:17Z

← Older revision		Revision as of 19:11, 21 May 2012
Line 23:		Line 23:
	'''Solution'''		'''Solution'''

	We will examine the data month by month. In June 100 units were sold, and in July ~~three~~ of these units were returned. This gives ~~three~~ failures at one month for the June shipment, which we will denote as <math>{{F}_{JUN,1}}=3</math> . Likewise, ~~three~~ failures occurred in August and ~~five~~ occurred in September for this shipment, or <math>{{F}_{JUN,2}}=3</math> and <math>{{F}_{JUN,3}}=5.</math> Consequently, at the end of our three-month analysis period, there were a total of 11 failures for the 100 units shipped in June. This means that 89 units are presumably still operating, and can be considered suspensions at three months, or <math>{{S}_{JUN,3}}=89</math> . For the shipment of 140 in July, ~~two~~ were returned the following month, or <math>{{F}_{JUL,1}}=2</math> , and ~~four~~ more were returned the month after that, or <math>{{F}_{JUL,2}}=4.</math> After two months, there are 134 ( <math>140-2-4=134</math> ) units from the July shipment still operating, or <math>{{S}_{JUL,2}}=134</math>. For the final shipment of 150 in August, ~~four~~ fail in September, or <math>{{F}_{AUG,1}}=4</math>, with the remaining 146 units being suspensions at one month, or <math>{{S}_{AUG,1}}=146</math> .		We will examine the data month by month. In June 100 units were sold, and in July 3 of these units were returned. This gives 3 failures at one month for the June shipment, which we will denote as <math>{{F}_{JUN,1}}=3</math> . Likewise, 3 failures occurred in August and 5 occurred in September for this shipment, or <math>{{F}_{JUN,2}}=3</math> and <math>{{F}_{JUN,3}}=5</math>. Consequently, at the end of our three-month analysis period, there were a total of 11 failures for the 100 units shipped in June. This means that 89 units are presumably still operating, and can be considered suspensions at three months, or <math>{{S}_{JUN,3}}=89</math>. For the shipment of 140 in July, 2 were returned the following month, or <math>{{F}_{JUL,1}}=2</math> , and 4 more were returned the month after that, or <math>{{F}_{JUL,2}}=4</math>. After two months, there are 134 ( <math>140-2-4=134</math> ) units from the July shipment still operating, or <math>{{S}_{JUL,2}}=134</math>. For the final shipment of 150 in August, 4 fail in September, or <math>{{F}_{AUG,1}}=4</math>, with the remaining 146 units being suspensions at one month, or <math>{{S}_{AUG,1}}=146</math>.

	It is now a simple matter to add up the number of failures for 1, 2, and 3 months, then add the suspensions to get our reliability data set:		It is now a simple matter to add up the number of failures for 1, 2, and 3 months, then add the suspensions to get our reliability data set:
Line 37:		Line 37:
	\end{matrix}</math></center>		\end{matrix}</math></center>

	To perform this analysis ~~using the Warranty Analysis tool~~ in Weibull++, create a ~~Warranty Analysis Folio~~ and choose I want to enter data ~~inNevada~~ format in the Project Wizard.		To perform this analysis in Weibull++, create a warranty analysis folio and choose '''I want to enter data in Nevada format''' in the Project Wizard.

	[[Image:warrantyan.png\|thumb\|center\|500px\| ]]		[[Image:warrantyan.png\|thumb\|center\|500px\| ]]
Line 43:		Line 43:
	[[Image:warrantynevada.png\|thumb\|center\|500px\| ]]		[[Image:warrantynevada.png\|thumb\|center\|500px\| ]]

	The next window allows you to specify the time units used. For this example select Months under I want to use the following unit type for each period and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:		The next window allows you to specify the time units used. For this example select '''Months''' under '''I want to use the following unit type for each period''' and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:

	[[Image:Warranty Example 1 Setup.png\|thumb\|center\|500px\| ]]		[[Image:Warranty Example 1 Setup.png\|thumb\|center\|500px\| ]]
Line 55:		Line 55:
	[[Image:Warranty Example 1 Return.png\|thumb\|center\|500px\| ]]		[[Image:Warranty Example 1 Return.png\|thumb\|center\|500px\| ]]

			The data can now be analyzed. Select 2-parameter Weibull as the distribution type and MLE as the analysis method and click the '''Calculate''' button. The estimated parameters are <math>\widehat{\beta }=2.49</math> and <math>\widehat{\eta }=6.70.</math>

	The data can now be analyzed. Select two-parameter Weibull as the distribution type and MLE as the analysis method and click the Calculate button. The estimated parameters are <math>\widehat{\beta }=2.49</math> and <math>\widehat{\eta }=6.70.</math>		Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the '''Transfer Life Data to New Folio''' button:

	Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:

	[[Image:transferdata2folio.png\|center\|400px ]]		[[Image:transferdata2folio.png\|center\|400px ]]

Chris Kahn at 19:02, 21 May 2012

2012-05-21T19:02:27Z

Nicolette Young at 22:09, 25 April 2012

2012-04-25T22:09:18Z

← Older revision		Revision as of 22:09, 25 April 2012
Line 60:		Line 60:
	Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:		Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:

	[[Image:transferdata2folio.png\|center\|~~250px~~ ]]		[[Image:transferdata2folio.png\|center\|300px ]]
	<math></math>		<math></math>

Nicolette Young at 22:09, 25 April 2012

2012-04-25T22:09:04Z

← Older revision		Revision as of 22:09, 25 April 2012
Line 60:		Line 60:
	Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:		Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:

	[[Image:transferdata2folio.png\|center ]]		[[Image:transferdata2folio.png\|center\|250px ]]
	<math></math>		<math></math>

Nicolette Young at 22:08, 25 April 2012

2012-04-25T22:08:32Z

← Older revision		Revision as of 22:08, 25 April 2012
Line 39:		Line 39:
	To perform this analysis using the Warranty Analysis tool in Weibull++, create a Warranty Analysis Folio and choose I want to enter data inNevada format in the Project Wizard.		To perform this analysis using the Warranty Analysis tool in Weibull++, create a Warranty Analysis Folio and choose I want to enter data inNevada format in the Project Wizard.

	[[Image:warrantyan.png\|thumb\|center\|~~400px~~\| ]]		[[Image:warrantyan.png\|thumb\|center\|250px\| ]]

	[[Image:warrantynevada.png\|thumb\|center\|~~400px~~\| ]]		[[Image:warrantynevada.png\|thumb\|center\|250px\| ]]

	The next window allows you to specify the time units used. For this example select Months under I want to use the following unit type for each period and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:		The next window allows you to specify the time units used. For this example select Months under I want to use the following unit type for each period and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:

	[[Image:Warranty Example 1 Setup.png\|thumb\|center\|~~400px~~\| ]]		[[Image:Warranty Example 1 Setup.png\|thumb\|center\|250px\| ]]

	The sales data are entered as follows:		The sales data are entered as follows:

	[[Image:Warranty Example 1 Sale.png\|thumb\|center\|~~400px~~\| ]]		[[Image:Warranty Example 1 Sale.png\|thumb\|center\|250px\| ]]

	The return data are entered as follows:		The return data are entered as follows:

	[[Image:Warranty Example 1 Return.png\|thumb\|center\|~~400px~~\| ]]		[[Image:Warranty Example 1 Return.png\|thumb\|center\|250px\| ]]


Line 68:		Line 68:
	The equivalent Times-to-failure folio is as follows:		The equivalent Times-to-failure folio is as follows:

	[[Image:Warranty Example 1 Standard Folio Data.png\|thumb\|center\|~~400px~~\| ]]		[[Image:Warranty Example 1 Standard Folio Data.png\|thumb\|center\|250px\| ]]

Nicolette Young at 23:04, 2 April 2012

2012-04-02T23:04:34Z

← Older revision		Revision as of 23:04, 2 April 2012
Line 60:		Line 60:
	Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:		Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:

	[[Image:transferdata2folio.png~~\|thumb~~\|center~~\|400px\|~~ ]]		[[Image:transferdata2folio.png\|center ]]
	<math></math>		<math></math>

Harry Guo at 20:49, 2 March 2012

2012-03-02T20:49:30Z

← Older revision		Revision as of 20:49, 2 March 2012
Line 45:		Line 45:
	The next window allows you to specify the time units used. For this example select Months under I want to use the following unit type for each period and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:		The next window allows you to specify the time units used. For this example select Months under I want to use the following unit type for each period and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:

	[[Image:~~projectitemwizardmos~~.png\|thumb\|center\|400px\| ]]		[[Image:Warranty Example 1 Setup.png\|thumb\|center\|400px\| ]]

	The sales data are entered as follows:		The sales data are entered as follows:

	[[Image:~~quantity100-150~~.png\|thumb\|center\|400px\| ]]		[[Image:Warranty Example 1 Sale.png\|thumb\|center\|400px\| ]]

	The return data are entered as follows:		The return data are entered as follows:

	[[Image:~~warrantymos-returns~~.png\|thumb\|center\|400px\| ]]		[[Image:Warranty Example 1 Return.png\|thumb\|center\|400px\| ]]


Line 68:		Line 68:
	The equivalent Times-to-failure folio is as follows:		The equivalent Times-to-failure folio is as follows:

	[[Image:~~wordfolio9~~.png\|thumb\|center\|400px\| ]]		[[Image:Warranty Example 1 Standard Folio Data.png\|thumb\|center\|400px\| ]]

Harry Guo at 19:04, 21 February 2012

2012-02-21T19:04:07Z

← Older revision		Revision as of 19:04, 21 February 2012
Line 19:		Line 19:

	Convert this information to life data, and determine the parameters for a two-parameter Weibull distribution.		Convert this information to life data, and determine the parameters for a two-parameter Weibull distribution.


	'''Solution'''		'''Solution'''


	We will examine the data month by month. In June 100 units were sold, and in July three of these units were returned. This gives three failures at one month for the June shipment, which we will denote as <math>{{F}_{JUN,1}}=3</math> . Likewise, three failures occurred in August and five occurred in September for this shipment, or <math>{{F}_{JUN,2}}=3</math> and <math>{{F}_{JUN,3}}=5.</math> Consequently, at the end of our three-month analysis period, there were a total of 11 failures for the 100 units shipped in June. This means that 89 units are presumably still operating, and can be considered suspensions at three months, or <math>{{S}_{JUN,3}}=89</math> . For the shipment of 140 in July, two were returned the following month, or <math>{{F}_{JUL,1}}=2</math> , and four more were returned the month after that, or <math>{{F}_{JUL,2}}=4.</math> After two months, there are 134 ( <math>140-2-4=134</math> ) units from the July shipment still operating, or <math>{{S}_{JUL,2}}=134</math>. For the final shipment of 150 in August, four fail in September, or <math>{{F}_{AUG,1}}=4</math>, with the remaining 146 units being suspensions at one month, or <math>{{S}_{AUG,1}}=146</math> .		We will examine the data month by month. In June 100 units were sold, and in July three of these units were returned. This gives three failures at one month for the June shipment, which we will denote as <math>{{F}_{JUN,1}}=3</math> . Likewise, three failures occurred in August and five occurred in September for this shipment, or <math>{{F}_{JUN,2}}=3</math> and <math>{{F}_{JUN,3}}=5.</math> Consequently, at the end of our three-month analysis period, there were a total of 11 failures for the 100 units shipped in June. This means that 89 units are presumably still operating, and can be considered suspensions at three months, or <math>{{S}_{JUN,3}}=89</math> . For the shipment of 140 in July, two were returned the following month, or <math>{{F}_{JUL,1}}=2</math> , and four more were returned the month after that, or <math>{{F}_{JUL,2}}=4.</math> After two months, there are 134 ( <math>140-2-4=134</math> ) units from the July shipment still operating, or <math>{{S}_{JUL,2}}=134</math>. For the final shipment of 150 in August, four fail in September, or <math>{{F}_{AUG,1}}=4</math>, with the remaining 146 units being suspensions at one month, or <math>{{S}_{AUG,1}}=146</math> .

← Older revision		Revision as of 19:02, 21 May 2012
Line 39:		Line 39:
	To perform this analysis using the Warranty Analysis tool in Weibull++, create a Warranty Analysis Folio and choose I want to enter data inNevada format in the Project Wizard.		To perform this analysis using the Warranty Analysis tool in Weibull++, create a Warranty Analysis Folio and choose I want to enter data inNevada format in the Project Wizard.

	[[Image:warrantyan.png\|thumb\|center\|~~250px~~\| ]]		[[Image:warrantyan.png\|thumb\|center\|500px\| ]]

	[[Image:warrantynevada.png\|thumb\|center\|~~250px~~\| ]]		[[Image:warrantynevada.png\|thumb\|center\|500px\| ]]

	The next window allows you to specify the time units used. For this example select Months under I want to use the following unit type for each period and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:		The next window allows you to specify the time units used. For this example select Months under I want to use the following unit type for each period and enter the Start month and Number of Periods and Increment number for the sales data and failure/return data as follows:

	[[Image:Warranty Example 1 Setup.png\|thumb\|center\|~~250px~~\| ]]		[[Image:Warranty Example 1 Setup.png\|thumb\|center\|500px\| ]]

	The sales data are entered as follows:		The sales data are entered as follows:

	[[Image:Warranty Example 1 Sale.png\|thumb\|center\|~~250px~~\| ]]		[[Image:Warranty Example 1 Sale.png\|thumb\|center\|500px\| ]]

	The return data are entered as follows:		The return data are entered as follows:

	[[Image:Warranty Example 1 Return.png\|thumb\|center\|~~250px~~\| ]]		[[Image:Warranty Example 1 Return.png\|thumb\|center\|500px\| ]]


Line 60:		Line 60:
	Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:		Even though this step is not required for the analysis, the data can also be transferred to a Weibull++ data sheet for illustrative purposes or for ancillary analysis. This can be done by clicking the Transfer Life Data to New Folio button:

	[[Image:transferdata2folio.png\|center\|~~300px~~ ]]		[[Image:transferdata2folio.png\|center\|400px ]]
	<math></math>		<math></math>

Line 68:		Line 68:
	The equivalent Times-to-failure folio is as follows:		The equivalent Times-to-failure folio is as follows:

	[[Image:Warranty Example 1 Standard Folio Data.png\|thumb\|center\|~~250px~~\| ]]		[[Image:Warranty Example 1 Standard Folio Data.png\|thumb\|center\|500px\| ]]