Template:System uptime/downtime - Revision history

Lisa Hacker: Replaced content with 'Category: For Deletion'

2012-08-01T07:23:02Z

Replaced content with 'Category: For Deletion'

← Older revision		Revision as of 07:23, 1 August 2012
Line 1:		Line 1:
	~~===System Uptime/Downtime===~~		[[Category: For Deletion]]

	~~====Uptime, <math>{{T}_{UP}}</math> ====~~
	~~<br>~~
	This is the average time the system was up and operating. This is obtained by taking the sum of the uptimes for each simulation and dividing it by the number of simulations. For this example, the uptime is 269.137. To compute the Operational Availability, <math>{{A}_{o}},</math> for this system, then:

	~~<br>~~

	~~::<math>{{A}_{o}}=\frac{{{T}_{UP}}}{{{T}_{S}}}(eqn 3)</math>~~
	~~<br>~~

	~~====CM Downtime, <math>{{T}_{C{{M}_{Down}}}}</math> ====~~
	This is the average time the system was down for corrective maintenance actions (CM) only. This is obtained by taking the sum of the CM downtimes for each simulation and dividing it by the number of simulations. For this example, this is 30.863.
	~~To compute the Inherent Availability, <math>{{A}_{I}},</math> for this system over the observed time (which may or may not be steady state, depending on the length of the simulation), then:~~

	~~<br>~~

	:~~:<math>{{A}_{I}}=\frac{{{T}_{S}}-{{T}_{C{{M}_{Down}}}}}{{{T}_{S}}}(eqn 4)</math>~~

	~~====Inspection Downtime ====~~
	~~<br>~~
	This is the average time the system was down due to inspections. This is obtained by taking the sum of the inspection downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no inspections were defined.

	~~====PM Downtime, <math>{{T}_{P{{M}_{Down}}}}</math>====~~
	~~<br>~~
	This is the average time the system was down due to preventive maintenance (PM) actions. This is obtained by taking the sum of the PM downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no PM actions were defined.
	~~<br>~~

	~~====OC Downtime, <math>{{T}_{O{{C}_{Down}}}}</math>====~~
	~~<br>~~
	This is the average time the system was down due to on-condition maintenance (PM) actions. This is obtained by taking the sum of the OC downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no OC actions were defined.
	~~<br>~~

	~~====Total Downtime, <math>{{T}_{Down}}</math>====~~
	~~<br>~~
	This is the downtime due to all events. In general, one may look at this as the sum of the above downtimes. However, this is not always the case. It is possible to have actions that overlap each other, depending on the options and settings for the simulation. Furthermore, there are other events that can cause the system to go down that do not get counted in any of the above categories. As an example, in the case of standby redundancy with a switch delay, if the settings are to reactivate the failed component after repair, the system may be down during the switch-back action. This downtime does not fall into any of the above categories but it is counted in the total downtime.
	~~<br>~~
	For ~~this example, this is identical to <math>{{T}_{C{{M}_{Down}}}}.</math>~~
	~~<br>~~

Dingzhou Cao: /* CM Downtime, {{T}_{C{{M}_{Down}}}} */

2012-02-20T17:13:55Z

CM Downtime, {{T}_{C{{M}_{Down}}}}

← Older revision		Revision as of 17:13, 20 February 2012
Line 16:		Line 16:
	<br>		<br>

	::<math>{{A}_{I}}=\frac{{{T}_{S}}-{{T}_{C{{M}_{Down}}}}}{{{T}_{S}}}</math>		::<math>{{A}_{I}}=\frac{{{T}_{S}}-{{T}_{C{{M}_{Down}}}}}{{{T}_{S}}}(eqn 4)</math>

	====Inspection Downtime ====		====Inspection Downtime ====

Dingzhou Cao: /* Uptime, {{T}_{UP}} */

2012-02-20T17:13:41Z

Uptime, {{T}_{UP}}

← Older revision		Revision as of 17:13, 20 February 2012
Line 7:		Line 7:
	<br>		<br>

	::<math>{{A}_{o}}=\frac{{{T}_{UP}}}{{{T}_{S}}}</math>		::<math>{{A}_{o}}=\frac{{{T}_{UP}}}{{{T}_{S}}}(eqn 3)</math>
	<br>		<br>

Dingzhou Cao: /* OC Downtime, {{T}_{O{{C}_{Down}}}} */

2012-02-09T21:26:16Z

OC Downtime, {{T}_{O{{C}_{Down}}}}

← Older revision		Revision as of 21:26, 9 February 2012
Line 29:		Line 29:
	====OC Downtime, <math>{{T}_{O{{C}_{Down}}}}</math>====		====OC Downtime, <math>{{T}_{O{{C}_{Down}}}}</math>====
	<br>		<br>
	This is the average time the system was down due to ~~preventive~~ maintenance (PM) actions. This is obtained by taking the sum of the PM downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no PM actions were defined.		This is the average time the system was down due to on-condition maintenance (PM) actions. This is obtained by taking the sum of the OC downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no OC actions were defined.
	<br>		<br>

Dingzhou Cao: /* PM Downtime, {{T}_{P{{M}_{Down}}}} */

2012-02-09T21:25:32Z

PM Downtime, {{T}_{P{{M}_{Down}}}}

← Older revision		Revision as of 21:25, 9 February 2012
Line 23:		Line 23:

	====PM Downtime, <math>{{T}_{P{{M}_{Down}}}}</math>====		====PM Downtime, <math>{{T}_{P{{M}_{Down}}}}</math>====
			<br>
			This is the average time the system was down due to preventive maintenance (PM) actions. This is obtained by taking the sum of the PM downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no PM actions were defined.
			<br>

			====OC Downtime, <math>{{T}_{O{{C}_{Down}}}}</math>====
	<br>		<br>
	This is the average time the system was down due to preventive maintenance (PM) actions. This is obtained by taking the sum of the PM downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no PM actions were defined.		This is the average time the system was down due to preventive maintenance (PM) actions. This is obtained by taking the sum of the PM downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no PM actions were defined.

Dingzhou Cao: /* CM Downtime, {{T}_{C{{M}_{Down}}}} */

2012-02-09T21:24:27Z

CM Downtime, {{T}_{C{{M}_{Down}}}}

← Older revision		Revision as of 21:24, 9 February 2012
Line 11:		Line 11:

	====CM Downtime, <math>{{T}_{C{{M}_{Down}}}}</math> ====		====CM Downtime, <math>{{T}_{C{{M}_{Down}}}}</math> ====
	This is the average time the system was down for corrective maintenance actions (CM) only. This is obtained by taking the sum of the CM downtimes for each simulation and dividing it by the number of simulations. For this example, this is 39.~~614~~.		This is the average time the system was down for corrective maintenance actions (CM) only. This is obtained by taking the sum of the CM downtimes for each simulation and dividing it by the number of simulations. For this example, this is 30.863.
	To compute the Inherent Availability, <math>{{A}_{I}},</math> for this system over the observed time (which may or may not be steady state, depending on the length of the simulation), then:		To compute the Inherent Availability, <math>{{A}_{I}},</math> for this system over the observed time (which may or may not be steady state, depending on the length of the simulation), then:

Dingzhou Cao: /* Uptime, {{T}_{UP}} */

2012-02-09T21:24:09Z

Uptime, {{T}_{UP}}

← Older revision		Revision as of 21:24, 9 February 2012
Line 3:		Line 3:
	====Uptime, <math>{{T}_{UP}}</math> ====		====Uptime, <math>{{T}_{UP}}</math> ====
	<br>		<br>
	This is the average time the system was up and operating. This is obtained by taking the sum of the uptimes for each simulation and dividing it by the number of simulations. For this example, the uptime is ~~260~~.~~386~~. To compute the Operational Availability, <math>{{A}_{o}},</math> for this system, then:		This is the average time the system was up and operating. This is obtained by taking the sum of the uptimes for each simulation and dividing it by the number of simulations. For this example, the uptime is 269.137. To compute the Operational Availability, <math>{{A}_{o}},</math> for this system, then:

	<br>		<br>

Dingzhou Cao: /* Inspection Downtime, .. */

2012-02-09T21:20:04Z

Inspection Downtime, ..

← Older revision		Revision as of 21:20, 9 February 2012
Line 18:		Line 18:
	::<math>{{A}_{I}}=\frac{{{T}_{S}}-{{T}_{C{{M}_{Down}}}}}{{{T}_{S}}}</math>		::<math>{{A}_{I}}=\frac{{{T}_{S}}-{{T}_{C{{M}_{Down}}}}}{{{T}_{S}}}</math>

	====Inspection Downtime~~, ..~~ ====		====Inspection Downtime ====
	<br>		<br>
	This is the average time the system was down due to inspections. This is obtained by taking the sum of the inspection downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no inspections were defined.		This is the average time the system was down due to inspections. This is obtained by taking the sum of the inspection downtimes for each simulation and dividing it by the number of simulations. For this example, this is zero because no inspections were defined.

Dingzhou Cao: /* Uptime, {{T}_{UP}} */

2012-02-09T21:19:31Z

Uptime, {{T}_{UP}}

← Older revision		Revision as of 21:19, 9 February 2012
Line 10:		Line 10:
	<br>		<br>

	CM Downtime, <math>{{T}_{C{{M}_{Down}}}}</math>		====CM Downtime, <math>{{T}_{C{{M}_{Down}}}}</math> ====
	This is the average time the system was down for corrective maintenance actions (CM) only. This is obtained by taking the sum of the CM downtimes for each simulation and dividing it by the number of simulations. For this example, this is 39.614.		This is the average time the system was down for corrective maintenance actions (CM) only. This is obtained by taking the sum of the CM downtimes for each simulation and dividing it by the number of simulations. For this example, this is 39.614.
	To compute the Inherent Availability, <math>{{A}_{I}},</math> for this system over the observed time (which may or may not be steady state, depending on the length of the simulation), then:		To compute the Inherent Availability, <math>{{A}_{I}},</math> for this system over the observed time (which may or may not be steady state, depending on the length of the simulation), then:
Line 17:		Line 17:

	::<math>{{A}_{I}}=\frac{{{T}_{S}}-{{T}_{C{{M}_{Down}}}}}{{{T}_{S}}}</math>		::<math>{{A}_{I}}=\frac{{{T}_{S}}-{{T}_{C{{M}_{Down}}}}}{{{T}_{S}}}</math>


	====Inspection Downtime, .. ====		====Inspection Downtime, .. ====

Dingzhou Cao: /* System Uptime/Downtime */

2012-02-09T21:19:11Z

System Uptime/Downtime

← Older revision		Revision as of 21:19, 9 February 2012
Line 1:		Line 1:
	===System Uptime/Downtime===		===System Uptime/Downtime===

	Uptime, <math>{{T}_{UP}}</math>		====Uptime, <math>{{T}_{UP}}</math> ====
	<br>		<br>
	This is the average time the system was up and operating. This is obtained by taking the sum of the uptimes for each simulation and dividing it by the number of simulations. For this example, the uptime is 260.386. To compute the Operational Availability, <math>{{A}_{o}},</math> for this system, then:		This is the average time the system was up and operating. This is obtained by taking the sum of the uptimes for each simulation and dividing it by the number of simulations. For this example, the uptime is 260.386. To compute the Operational Availability, <math>{{A}_{o}},</math> for this system, then: