Template:System with Two Standby Blocks (SCT solution) - Revision history

Lisa Hacker: /* Two Standby Blocks */

2012-07-31T09:31:57Z

Two Standby Blocks

← Older revision		Revision as of 09:31, 31 July 2012
Line 1:		Line 1:
	~~=== Two Standby Blocks ===~~		#REDIRECT [[Example_Using_SCT_to_Model_Two_Standby_Blocks]]

	~~==== Purpose ====~~
	~~The purpose of this example is to illustrate how to model a system with two standby devices with SCT.~~

	~~==== Statement ====~~
	Assume that there are four devices A, B, C and D in the system. The system begins with A and B as active devices and C and D as standby devices. At least 2 out of the 4 devices have to be in active status to assure that the system is working. If one of the active device fails, one of standby devices will be activated. After the active device is restored, it will become a standby device. For example, when A fails, C or D will be activated. After A finishes repair, it will become a standby device.

	~~==== BlockSim Solution ====~~

	It is easy to model this system with standby containers. However, standby containers have some limitations in other applications. Here we want to model this system with SCT. It is not possible to model this system directly with SCT, so we present an alternative solution which can approximate this system.

	The logic is as follows: We will activate all standby devices whenever an active device fails. After activating all standby devices, we will check how many devices are in active status. If there are more than 2 devices in active status, we will deactivate some of them to assure that there are exactly two devices in active status at every moment. The drawback of this solution is that it will activate and deactivate the devices more times than we expected. For example, if A and B are active, then when A fails, it will activate C and D. After activating C and D it will detect that there are three devices in active status, so it will deactivate one of the three active devices: B, C or D. As we can see, it has the chance to deactivate B instead of C, which is not what we expected. If there is extra cost related to activation, this solution is not a good option.

	In order to detect that there are more than two devices in active status, we have four subdiagram blocks: ABC, ABD, ACD and BCD. ABC contains mirror blocks A, B and C in series. The RBDs for the main diagram and subdiagram are as shown in the figures below.

	~~Mirror group A includes Block A in the main diagram, Block A in subdiagram ABC, Block A in subdiagram ABD and Block A in subdiagram ACD.~~

	~~Mirror group B includes Block B in the main diagram, Block B in subdiagram ABC, Block B in subdiagram ABD and Block B in subdiagram BCD.~~

	~~Mirror group C includes Block C in the main diagram, Block C in subdiagram ABC, Block C in subdiagram BCD and Block C in subdiagram ACD.~~

	~~Mirror group A includes Block D in the main diagram, Block D in subdiagram ABD, Block D in subdiagram ACD and Block D in subdiagram BCD.~~

	~~All four blocks (A, B, C and D) follow a Weibull distribution with Beta = 1.5 and Eta = 100 hours for reliability and have CM with duration = 100 hours.~~

	Block A belongs to maintenance group A. It has SCT with initial state ON and state upon repair "Default OFF unless SCT overridden." If any item from maintenance group B, C and D goes down, Block A is activated. If any item from maintenance group ABC is restored, we will deactivate Block A.

	Block B belongs to maintenance group B. It has SCT with initial state ON and state upon repair "Default OFF unless SCT overridden." If any item from maintenance group A, C and D goes down, Block B is activated. If any item from maintenance group ABD is restored, we will deactivate Block B.

	Block C belongs to maintenance group C. It has SCT with initial state OFF and state upon repair "Default OFF unless SCT overridden." If any item from maintenance group A, B and D goes down, Block C is activated. If any item from maintenance group ACD is restored, we will deactivate Block C.

	Block D belongs to maintenance group D. It has SCT with initial state OFF and state upon repair "Default OFF unless SCT overridden." If any item from maintenance group A, B and C goes down, Block D is activated. If any item from maintenance group BCD is restored, we will deactivate Block D.

	~~Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.~~

	~~[[Image:System with two standby Main.png\|center\|350px]]~~
	~~<br>~~
	~~[[Image:System with two standby All subdiagrams.png\|center\|500px]]~~

	~~==== System Events ====~~

	~~The system event log for a single run through the simulation algorithm (simulation seed: 9)is shown in the Block Up/Down plot below, and is as follows:~~

	~~#At 26 hours, Block A fails. Block C and D are activated. However, there are three blocks in active status, thus Block D is deactivated immediately. ~~
	~~#At 126 hours, Block A finishes its repair. According to the settings, Block A is OFF as a standby device.~~
	#At 224 hours, Block C fails. Blocks A and D are activated. However, there are three blocks (A, B, and D) in active status, thus Block B is deactivated immediately. NOTICE: B should not be deactivated here, however we cannot control this. This is the drawback of this solution. If there is extra cost related to activation and deactivation, we are wasting resources by deactivating Block B.
	~~#At 243 hours, Block A fails and activates Block B. ~~
	#At 248 hours, Block B fails and this failure tries to activate Blocks A and C. However, Blocks A and C are down at this time. This trigger event is on hold for Blocks A and C. After Block A and C finish their repair at 324 hours and 343 hours respectively, they are ON immediately.
	#At 343 hours, Block A finishes its repair. There is a trigger event on hold due to the failure of Block B at 248 hours. Block A is ON upon repair. At this time, there are three blocks in active status (Blocks A, C and D), thus Block C is deactivated immediately. This is another instance of wasting resources. The ideal case would be for Block A to be deactivated at this time.
	#~~At 408 hours, Block A fails and activates Blocks B and C. Since there are three blocks in active status, Block D is deactivated immediately to assure that only two blocks are in active status. ~~

	~~[[Image:System with two standby Up down plot.png\|center]]~~

	[[~~Category:BlockSim_Examples~~]]

Richard House: /* BlockSim Solution */

2012-07-31T08:20:44Z

BlockSim Solution

← Older revision		Revision as of 08:20, 31 July 2012
Line 35:		Line 35:
	Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.		Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.

	[[Image:System with two standby Main.png\|center\|~~250px~~]]		[[Image:System with two standby Main.png\|center\|350px]]
	<br>		<br>
	[[Image:System with two standby All subdiagrams.png\|center\|~~400px~~]]		[[Image:System with two standby All subdiagrams.png\|center\|500px]]

	==== System Events ====		==== System Events ====

Lisa Hacker: /* System Events */

2012-07-26T10:50:29Z

System Events

← Older revision		Revision as of 10:50, 26 July 2012
Line 51:		Line 51:
	#At 408 hours, Block A fails and activates Blocks B and C. Since there are three blocks in active status, Block D is deactivated immediately to assure that only two blocks are in active status.		#At 408 hours, Block A fails and activates Blocks B and C. Since there are three blocks in active status, Block D is deactivated immediately to assure that only two blocks are in active status.

	[[Image:System with two standby Up down plot.png\|center~~\|350px~~]]		[[Image:System with two standby Up down plot.png\|center]]

	[[Category:BlockSim_Examples]]		[[Category:BlockSim_Examples]]

Melinda Caroline: /* System Events */

2012-06-15T13:05:50Z

System Events

← Older revision		Revision as of 13:05, 15 June 2012
Line 51:		Line 51:
	#At 408 hours, Block A fails and activates Blocks B and C. Since there are three blocks in active status, Block D is deactivated immediately to assure that only two blocks are in active status.		#At 408 hours, Block A fails and activates Blocks B and C. Since there are three blocks in active status, Block D is deactivated immediately to assure that only two blocks are in active status.

	[[Image:System with two standby Up down plot.png\|center\|~~250px~~]]		[[Image:System with two standby Up down plot.png\|center\|350px]]

	[[Category:BlockSim_Examples]]		[[Category:BlockSim_Examples]]

Melinda Caroline: /* BlockSim Solution */

2012-06-15T13:05:31Z

BlockSim Solution

← Older revision		Revision as of 13:05, 15 June 2012
Line 37:		Line 37:
	[[Image:System with two standby Main.png\|center\|250px]]		[[Image:System with two standby Main.png\|center\|250px]]
	<br>		<br>
	[[Image:System with two standby All subdiagrams.png\|center\|~~250px~~]]		[[Image:System with two standby All subdiagrams.png\|center\|400px]]

	==== System Events ====		==== System Events ====

Chuck Smith: /* Two Standby Blocks */

2012-04-25T20:54:43Z

Two Standby Blocks

← Older revision		Revision as of 20:54, 25 April 2012
Line 35:		Line 35:
	Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.		Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.

	[[Image:System with two standby Main.png\|center\|~~500px~~]]		[[Image:System with two standby Main.png\|center\|250px]]
	<br>		<br>
	[[Image:System with two standby All subdiagrams.png\|center\|~~500px~~]]		[[Image:System with two standby All subdiagrams.png\|center\|250px]]

	==== System Events ====		==== System Events ====
Line 51:		Line 51:
	#At 408 hours, Block A fails and activates Blocks B and C. Since there are three blocks in active status, Block D is deactivated immediately to assure that only two blocks are in active status.		#At 408 hours, Block A fails and activates Blocks B and C. Since there are three blocks in active status, Block D is deactivated immediately to assure that only two blocks are in active status.

	[[Image:System with two standby Up down plot.png\|center\|~~500px~~]]		[[Image:System with two standby Up down plot.png\|center\|250px]]

	[[Category:BlockSim_Examples]]		[[Category:BlockSim_Examples]]

Nikki Helms: /* BlockSim Solution */

2012-03-30T18:39:38Z

BlockSim Solution

← Older revision		Revision as of 18:39, 30 March 2012
Line 36:		Line 36:

	[[Image:System with two standby Main.png\|center\|500px]]		[[Image:System with two standby Main.png\|center\|500px]]
			<br>
	[[Image:System with two standby All subdiagrams.png\|center\|500px]]		[[Image:System with two standby All subdiagrams.png\|center\|500px]]

Nikki Helms: /* BlockSim Solution */

2012-03-30T18:39:23Z

BlockSim Solution

← Older revision		Revision as of 18:39, 30 March 2012
Line 37:		Line 37:
	[[Image:System with two standby Main.png\|center\|500px]]		[[Image:System with two standby Main.png\|center\|500px]]

	[[Image:System with two standby All subdiagrams.png\|center\|~~800px~~]]		[[Image:System with two standby All subdiagrams.png\|center\|500px]]

	==== System Events ====		==== System Events ====

Nikki Helms: /* BlockSim Solution */

2012-03-30T18:39:06Z

BlockSim Solution

← Older revision		Revision as of 18:39, 30 March 2012
Line 35:		Line 35:
	Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.		Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.

	[[Image:System with two standby Main.png\|center\|~~800px~~]]		[[Image:System with two standby Main.png\|center\|500px]]

	[[Image:System with two standby All subdiagrams.png\|center\|800px]]		[[Image:System with two standby All subdiagrams.png\|center\|800px]]

Nikki Helms: /* BlockSim Solution */

2012-03-30T18:38:31Z

BlockSim Solution

← Older revision		Revision as of 18:38, 30 March 2012
Line 35:		Line 35:
	Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.		Subdiagram block ABC belongs to maintenance group ABC. The other three subdiagram blocks each belong to the maintenance group with the corresponding name.

	[[Image:System with two standby Main.png~~\|thumb~~\|center\|800px]]		[[Image:System with two standby Main.png\|center\|800px]]

	[[Image:System with two standby All subdiagrams.png~~\|thumb~~\|center\|800px]]		[[Image:System with two standby All subdiagrams.png\|center\|800px]]

	==== System Events ====		==== System Events ====