Template:Non-Parametric LDA Example (Standard Actuarial Method): Difference between revisions
Jump to navigation
Jump to search
[math]\displaystyle{ \begin{matrix}
Start & End & Number of & Number of & Adjusted & {} & {} \\
Time & Time & Failures, {{r}_{i}} & Suspensions, {{s}_{i}} & Units, n_{i}^{\prime } & 1-\tfrac{{{r}_{j}}}{n_{j}^{\prime }} & \mathop{}_{}^{}1-\tfrac{{{r}_{j}}}{n_{j}^{\prime }} \\
0 & 50 & 2 & 4 & 53 & 0.962 & 0.962 \\
50 & 100 & 0 & 5 & 46.5 & 1.000 & 0.962 \\
100 & 150 & 2 & 2 & 43 & 0.953 & 0.918 \\
150 & 200 & 3 & 5 & 37.5 & 0.920 & 0.844 \\
200 & 250 & 2 & 1 & 31.5 & 0.937 & 0.791 \\
250 & 300 & 1 & 2 & 28 & 0.964 & 0.762 \\
300 & 350 & 2 & 1 & 25.5 & 0.922 & 0.702 \\
350 & 400 & 3 & 3 & 21.5 & 0.860 & 0.604 \\
400 & 450 & 3 & 4 & 15 & 0.800 & 0.484 \\
450 & 500 & 1 & 2 & 9 & 0.889 & 0.430 \\
500 & 550 & 2 & 1 & 6.5 & 0.692 & 0.298 \\
550 & 600 & 1 & 0 & 4 & 0.750 & 0.223 \\
600 & 650 & 2 & 1 & 2.5 & 0.200 & 0.045 \\
\end{matrix} }[/math]
Chris Kahn (talk | contribs) |
Chris Kahn (talk | contribs) |
||
Line 5: | Line 5: | ||
Find reliability estimates for the data in Example for the Simple Actuarial Method using the standard actuarial method. | Find reliability estimates for the data in Example for the Simple Actuarial Method using the standard actuarial method. | ||
=====Solution(Standard Actuarial Method)===== | =====Solution (Standard Actuarial Method)===== | ||
The solution to this example is similar to that of Example 10, with the exception of the inclusion of the <math>n_{i}^{\prime }</math> term, which is used in Eqn. (standact). Applying this equation to the data, we can generate the following table: | The solution to this example is similar to that of Example 10, with the exception of the inclusion of the <math>n_{i}^{\prime }</math> term, which is used in Eqn. (standact). Applying this equation to the data, we can generate the following table: | ||
Revision as of 23:03, 3 May 2012
Non-Parametric LDA Example (Standard Actuarial Method)
Problem Statement (Standard Actuarial Method)
Find reliability estimates for the data in Example for the Simple Actuarial Method using the standard actuarial method.
Solution (Standard Actuarial Method)
The solution to this example is similar to that of Example 10, with the exception of the inclusion of the [math]\displaystyle{ n_{i}^{\prime } }[/math] term, which is used in Eqn. (standact). Applying this equation to the data, we can generate the following table:
As can be determined from the preceding table, the reliability estimates for the failure times are: