Template:Example: Weibull Disribution Unreliability RRX Example: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 15: Line 15:
The second method involves the use of the Quick Calculation Pad (QCP).  
The second method involves the use of the Quick Calculation Pad (QCP).  


[[Image: QCP icon.png|center]]
Select '''Prob. of Failure''' calculation option and enter 30 hours in the Mission End Time box. Click '''Calculate''' to get the result.  
 
Once activated, the QCP will appear on your desktop. Select '''Prob. of Failure''' Calculations and enter 30 hours in the Mission End Time box. Click '''Calculate''' to get the result.  


[[Image: QCP Result.png|center|550px]]
[[Image: QCP Result.png|center|550px]]


Note that the results in QCP vary according to the parameter estimation method used. The above results are obtained using RRX.
Note that the results in QCP vary according to the parameter estimation method used. The above results are obtained using RRX.

Revision as of 09:30, 8 August 2012

Weibull Disribution Unreliability RRX Example

Assume that six identical units are being tested. All the six failur times are: 93, 34, 16, 120, 53 and 75. What is the unreliability of the units for a mission duration of 30 hours, starting the mission at age zero? To replicate the results in this reference with Weibull++, choose RRX (Rank Regression on X) as the calculation method.

Solution

First, use Weibull++ to obtain the parameters using RRX.

Then, we investigate several methods of solution for this problem. The first, and more laborious, method is to extract the information directly from the plot. You may do this with either the screen plot in RS Draw or the printed copy of the plot. (When extracting information from the screen plot in RS Draw, note that the translated axis position of your mouse is always shown on the bottom right corner.)

RS Draw.png

Using this first method, enter either the screen plot or the printed plot with T = 30 hours, go up vertically to the straight line fitted to the data, then go horizontally to the ordinate, and read off . Then, a good estimate of the sought unreliability is 23%. (Also, the reliability estimate is 1.0 - 0.23 = 0.77 or 77%.)

The second method involves the use of the Quick Calculation Pad (QCP).

Select Prob. of Failure calculation option and enter 30 hours in the Mission End Time box. Click Calculate to get the result.

QCP Result.png

Note that the results in QCP vary according to the parameter estimation method used. The above results are obtained using RRX.