|
|
| (8 intermediate revisions by 4 users not shown) |
| Line 1: |
Line 1: |
| '''A Mixed Weibull Example (2Subpop)'''
| | #REDIRECT [[Mixed Weibull Example]] |
| | |
| We will illustrate mixed Weibull analysis using a Monte Carlo generated set of data. To repeat this example, generate data from a two-parameter Weibull distribution, using the Weibull++ Monte Carlo data window. The following figures illustrate the required steps, inputs and results.
| |
| | |
| • In the Monte Carlo window, enter the values and select the options shown below for subpopulation 1.
| |
| | |
| [[Image:Mixed Weibull Example 1 Simulation Sub1.png|thumb|center|400px| ]]
| |
| | |
| Switch to subpopulation 2 and make the selection shown below. Click Generate.
| |
| | |
| [[Image: Mixed Weibull Example 1 Simulation Sub2.png|thumb|center|400px| ]]
| |
| | |
| The simulation settings are:
| |
| | |
| [[Image:Mixed Weibull Example 1 Simulation Settings.png|thumb|center|400px| ]]
| |
| | |
| • After the data has been generated, choose the 2 Subpop-Mixed Weibull distribution. Click the '''Calculate icon'''.
| |
| | |
| The results for subpopulation 1 are shown next. (Note that your results could be different due to the randomness of the simulation.)
| |
| | |
| [[Image:Mixed Weibull Example 1 Sub1 Result.png.png|thumb|center|400px| ]]
| |
| | |
| The results for subpopulation 2 are shown next (Note that your results could be different due to the randomness of the simulation.)
| |
| | |
| [[Image:Mixed Weibull Example 1 Sub2 Result.png|thumb|center|400px| ]]
| |
| | |
| The Weibull probability plot for this data is shown next (Note that your results could be different due to the randomness of the simulation.)
| |
| | |
| [[Image:Mixed Weibull Example 1 Plot.png|thumb|center|400px| ]] | |