cScheduledTask Class
Jump to navigation
Jump to search
Member of: SynthesisAPI
Represents a scheduled task resource. The task may be a preventive maintenance, inspection or on condition task.
Constructors
Name | Description |
---|---|
cScheduledTask | Creates an instance of the cSheduledTask class. |
cScheduledTask() | A parameterized constructor for the cScheduledTask class. (.NET only) |
Methods
Name | Description |
---|---|
GetCrewIDs | Returns an array containing the numeric IDs of the crews assigned to the task. Long. |
SetCrewIDs | Assigns crews to the task. |
Properties
Name | Description |
---|---|
BringItemDown | Indicates whether the task brings the item down. Boolean |
BringSystemDown | Indicates whether the task brings the system down. Boolean |
Condition | Gets or sets a description of the condition that indicates that a failure will occur (for reliability centered maintenance analysis), such as a threshold for a measurement of wear, vibration, etc. String. |
CrewIDs() | Gets or sets an array containing the numeric IDs of the crews assigned to the task. (VB.NET only) Long |
DurationModelID | Gets or sets the numeric ID of the model that represents the duration of the task. Integer |
GroupIDs() | Gets an array containing the numeric IDs of the selected maintenance groups when the task is performed based on maintenance groups. (VB.NET only) Long. |
ID | Gets the numeric ID of the task. Integer. |
Intervals() | Gets or sets an array containing the interval start values when the task is performed based on dynamic intervals. Double. |
ItemApplication | Gets or sets the item's application. (Synthesis identifier) String |
ItemCategoryID | Gets or sets the category ID. (Synthesis identifier) Integer |
ItemComments | Gets or sets the comments. (Synthesis identifier) String |
ItemDescription | Gets or sets the description. (Synthesis identifier) String |
ItemKeywords | Gets or sets the keywords. (Synthesis identifier) String |
ItemPartNumber | Gets or sets the part number. (Synthesis identifier) String |
ItemSupplier | Gets or sets the supplier name. (Synthesis identifier) String |
ItemVersion | Gets or sets the version number. (Synthesis identifier) String |
MaintenanceTriggers | Gets or sets the value of the maintenance trigger assigned to the task. Integer. |
MiscCostModelID | Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to preventive and inspection tasks. Integer. |
MiscCostPerTimeModelID | Gets or sets the numeric ID of the model that represents the task's downtime rate ($/Hr). Applies to preventive and inspection tasks. Integer. |
Name | Gets or sets the task's name. String. |
OCMiscCostModelID | Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to on condition tasks upon detection. Integer. |
OCMiscCostPerTimeModelID | Gets or sets the numeric ID of the model that represents the task's downtime rate($/Hr). Applies to on condition tasks upon detection.Integer. |
OnCondBringItemDown | Indicates whether the task brings the item down. Applies to on condition tasks upon detection. Boolean. |
OnCondBringSystemDown | Indicates whether the task brings the system down. Applies to on condition tasks upon detection. Boolean |
OnCondCrewIDs() | Gets or sets an array containing the numeric IDs of the crews assigned to the task. Applies to on condition tasks upon detection. Long. |
OnCondDurationModelID | Gets or sets the numeric ID of the model that represents the duration of the task. Applies to on condition tasks upon detection. Integer. |
OnCondFailureDetectionThreshold | Gets or sets the value for the task's failure detection threshold interval (0.9 = 90% percent of life). Double. |
OnCondPerformTaskEvenIfItBringsSysDown | Indicates whether the task should be performed if bringing the item down causes the system to go down. Boolean |
OnCondPFInterval | Gets or sets the value for the task's prior-to-failure (P-F) interval. Double. |
OnCondPFIntervalUnitID | Gets or sets the numeric ID of the unit of measurement applied to the P-F interval. Integer. |
OnCondPoolID | Gets or sets the numeric ID of the spare part pool assigned to the on condition task. Integer. |
OnCondResFactorValue | Gets or sets the on condition task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double. |
OnCondResFactorType | Gets or set a value from the TaskRestorationTypeEnum enumeration, which specifies the damage the restoration applies to (i.e., restores all accumulated damage or restores only damage accumulated since last repair). |
OnCondUsePFInterval | Indicates whether the prior-to-failure (P-F) interval should be used to detect imminent failures. Boolean. If true, specify a value for OnCondPFInterval; if false, specify a value for OnCondFailureDetectionThreshold. |
PackageID | Gets the numeric ID of the task package that will override the task's scheduling properties (0 = no override). Integer. |
PerformTaskEvenIfItBringsSysDown | Indicates whether the task should be performed if bringing the item down causes the system to go down. Boolean |
PerformTaskEvenIfItemAlreadyFailed | Indicates whether the task should be performed even if the item failed before the task was scheduled to occur. Boolean |
PoolID | Gets or sets the numeric ID of the spare part pool assigned to the task. Integer. |
ProjectID | Gets the numeric ID of the project the task belongs to. Integer. |
PropInterval | Gets or sets the interval value that was initially proposed for the task (for reliability centered maintenance analysis). Variant. |
PropIntervalUnitID | Gets or sets numeric ID for the unit of measurement applied to the proposed interval. Integer. |
RefDoc | Gets or sets the description for the reference document that provides more detailed information about the task (for reliability centered maintenance analysis). String. |
ResFactorType | Gets or sets a value from the TaskRestorationTypeEnum enumeration, which specifies the damage the restoration applies to (i.e., restores all accumulated damage or restores only damage accumulated since last repair). |
ResFactorValue | Gets or sets the scheduled task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double. |
Status | Gets or sets the status of the task (for reliability centered maintenance analysis). String. |
TaskAccess | Gets or sets the access that will be required in order to perform the task (typically for aircraft MSG-3 analyses). String. |
TaskClass | Gets or set one of the values of the TaskClassEnum, which specifies the task's class (e.g., preventive task, inspection or on condition). |
TaskFrequencyID | Gets or sets a value from the TaskFrequencyEnum, which specifies the frequency at which the task is performed. |
TaskFrequencyUnitID | Gets or sets the numeric ID of the unit of measurement of the intervals at which the task is performed. Integer. |
TaskFrequencyValue | Gets or sets the fixed interval at which the task is performed. Double. |
TaskFreqValueVariableID | Gets or sets the numeric ID of the variable that represents the fixed interval at which the task is performed. Integer. |
TaskTypeID | Gets or sets the numeric ID of the RCM++ or RBI task type (1 = the first task type defined in the repository). Integer. |
TaskZone | Gets or sets the zone of the system in which the task will be performed (aircraft MSG-3 analyses). String. |
UDD1 | Gets or sets the text in the first user-defined drop-down field. (Limited to 50 characters.) String. |
UDD2 | Gets or sets the text in the second user-defined drop-down field. (Limited to 50 characters.) String. |
UDT1 | Gets or sets the date in the first user-defined date field. Variant. |
UDT2 | Gets or sets the date in the second user-defined date field. Variant. |
UN1 | Gets or sets the value in the first user-defined number field. Variant. |
UN2 | Gets or sets the value in the second user-defined number field. Variant. |