BlockSim Example: Default OFF unless SCT Overridden

Default OFF unless SCT overridden Example

Purposes

The purposes of this example is to illustrate the following options in SCT:

1. State Upon Repair: Default OFF unless SCT overridden
   
2. Activate a block if any item from these associated maintenance group(s) is restored
   
3. Deactivate a block if any item from these associated maintenance group(s) goes down
   
4. Activate a block if any item from these associated maintenance group(s) goes down
   
5. Deactivate a block if any item from these associated maintenance group(s) is restored
   

Description

Consider a system shown in Figure below: