2-Subpopulation Mixed Weibull Example

From ReliaWiki
Revision as of 22:44, 21 March 2012 by Chuck Smith (talk | contribs)
Jump to navigation Jump to search
Weibull-Examples-banner.png

A Mixed Weibull Example (2Subpop)

We will illustrate mixed Weibull analysis using a Monte Carlo generated set of data. To repeat this example, generate data from a two-parameter Weibull distribution, using the Weibull++ Monte Carlo data window. The following figures illustrate the required steps, inputs and results.

• In the Monte Carlo window, enter the values and select the options shown below for subpopulation 1.

Mixed Weibull Example 1 Simulation Sub1.png

Switch to subpopulation 2 and make the selection shown below. Click Generate.

Mixed Weibull Example 1 Simulation Sub2.png

The simulation settings are:

Mixed Weibull Example 1 Simulation Settings.png

• After the data has been generated, choose the 2 Subpop-Mixed Weibull distribution. Click the Calculate icon.

The results for subpopulation 1 are shown next. (Note that your results could be different due to the randomness of the simulation.)

Mixed Weibull Example 1 Sub1 Result.png.png

The results for subpopulation 2 are shown next (Note that your results could be different due to the randomness of the simulation.)

Mixed Weibull Example 1 Sub2 Result.png

The Weibull probability plot for this data is shown next (Note that your results could be different due to the randomness of the simulation.)

Mixed Weibull Example 1 Plot.png