2-Subpopulation Mixed Weibull Example

From ReliaWiki
Revision as of 20:57, 3 May 2012 by Chris Kahn (talk | contribs)
Jump to navigation Jump to search
Weibull-Examples-banner.png

We will illustrate mixed Weibull analysis using a set of simulated data. To repeat this example, first use the Monte Carlo utility to generate two sub-populations of data using a 2-parameter Weibull distribution. Then analyze the data in a standard folio. The required steps, inputs and results are described below.

In the Monte Carlo window, enter the values and select the options shown below for subpopulation 1.

Mixed Weibull Example 1 Simulation Sub1.png

Switch to subpopulation 2 and make the selection shown below.

Mixed Weibull Example 1 Simulation Sub2.png

The simulation settings are:

Mixed Weibull Example 1 Simulation Settings.png

Click Generate. After the data has been generated, choose the 2 Subpop-Mixed Weibull distribution in the standard folio and click the Calculate icon.

The results for subpopulation 1 are shown next.

Mixed Weibull Example 1 Sub1 Result.png.png

The results for subpopulation 2 are shown next.

Mixed Weibull Example 1 Sub2 Result.png

The Weibull probability plot for this data is shown next.

Mixed Weibull Example 1 Plot.png