BlockSim Analytical Fault Tree Plot ptStaticRI

From ReliaWiki
Revision as of 20:19, 21 March 2012 by Nicolette Young (talk | contribs)
Jump to navigation Jump to search
Webnotes-BlockSim.png
Static RI Plot

Static RI shows the static reliability importance of a specified number of blocks in the system at a specific time. To view this plot, you must specify the time at which the reliability importance is calculated and the number of blocks to display. The plot will show the blocks with the highest reliability importance (e.g., if you specify to show five blocks, the plot will show the 5 blocks with the highest reliability importance). Point to a bar to view the block’s name, reliability and calculated importance. Blocks with the highest reliability are shown in green, blocks with medium reliability are shown in yellow and blocks with the lowest reliability are shown in red.


Learn more from...

Helpblue.png the help files...
Book blue.png the theory textbook...
Articleblue.png related article(s)...
Bulbblue.png use example(s)...















Docedit.png