CScheduledTask Class

The cScheduledTask class allows you to choose or create multiple scheduled tasks for the URD. Each task may be a preventive maintenance, inspections or on condition task. The tasks are displayed in their priority order, which is the order in which they will be performed.

To access/edit repository level information, including accessing/adding resources, please see Repository Class.

Constructors

• cScheduledTask Creates a new scheduled task.

Properties

General

• Name (as string) Gets or sets the task's Name.
• TaskClass (as TaskClassEnum) Gets or sets the task's class (i.e., preventive task).
• TaskTypeID (as integer) Gets or sets the numerical ID of the task's type (e.g., restoration, condition based).
• DiagramIDs (as integer() ) Gets an array of numerical IDs for the diagrams the task is assigned to. (Note: Not shown in software.)

Task Scheduling

• TaskFrequencyIDOrig (as TaskFrequencyEnum) Gets the enumeration that specifies when the task is performed.
• TaskFrequencyUnitIDOrig (as integer) Gets the numerical ID for the original units of measurement of the intervals at which the task is performed. (Note: Not shown in software.)
• TaskFrequencyUnitID (as integer) Gets the numerical ID for the current units of measurement of the intervals at which the task is performed.
• TaskFrequencyValueOrig (as double) Gets or sets the original Fixed Interval when the task is performed based on item age. (Note: May be removed/hidden.)
• TaskFrequencyValue (as double) Gets or sets the current Fixed Interval when the task is performed based on item age.
• TaskFreqValueVariableIDOrig (as integer) Gets the numerical ID of the variable that originally represented the Fixed Interval when the task is performed based on item age. (Note: Not shown in software.)
• TaskFreqValueVariableID (as integer) Gets the numerical ID of the variable that currently represents the Fixed Interval when the task is performed based on item age.)
• Intervals (as double()) Gets an array of interval start values when the task is performed based on dynamic intervals.
• PackageID (as integer) Gets the numerical ID of the task package that will override this task's scheduling properties (0 = no override).
• GroupIDs (as integer()) Gets an array of numerical IDs for selected maintenance groups when task performance is based on maintenance groups. (Note:May be removed/hidden.)
• MaintenanceTriggers (as integer) Gets the value of the maintenance trigger assigned to the task. (Note: May be removed/hidden.)

Basic Task Properties

• DurationModelID (as integer) Gets the ID of the model that describes the duration of the task.
• CrewIDs (as integer()) Gets the IDs of the crews assigned to the task.
• SetCrewIDs (ByRef arr() as integer) Version 10 Only - Sets the crew IDs. Designed for VB6/VBA users. .NET users should use CrewIDs property instead. Returns the 0 based array of IDs.
• GetCrewIDs (ByRef arr() as integer) Version 10 Only - Gets an array of the crew IDs. Designed for VB6/VBA users. .NET users should use CrewIDs property instead. Returns the 0 based array of IDs.
• PoolID (as integer) Gets the IDs of the pool assigned to the task.

Task Consequences

• BringSystemDown (as boolean) Gets or sets whether the task brings a system down.
• BringItemDown (as boolean) Gets or sets whether the task brings an item down.
• PerformTaskEvenIfItBringsSysDown (as boolean) Gets or sets whether the task should be performed if bringing the item down causes the system to go down.
• PerformTaskEvenIfItemAlreadyFailed (as boolean) Gets or sets whether the task should be performed if it has already failed.

Restoration

• ResFactorValue (as double) Gets or sets the corrective task's Restoration Amount (0.9 = 90% restoration).
• ResFactorType (as TaskRestorationTypeEnum) Gets or sets the enumeration for the damage the restoration applies to (i.e., all damage or only damage since last repair.

Additional Costs to Consider

• MiscCostModelID (as integer) Gets the numerical ID model that represents the task's Cost Per Task.
• MiscCostPerTimeModelID (as integer) Gets the numerical ID of the model that represents the task's Downtime Rate.

Failure Detection

• OnCondFailureDetectionThreshold (as double) Gets or sets the value for the task's failure detection threshold interval (0.9 = 90% percent of life.
• OnCondUsePFInterval (as boolean) Gets or sets whether the prior to failure interval should be used.
• OnCondPFInterval (as double) Gets or sets the value for the task's prior to failure interval.
• OnCondPFIntervalUnitID (as integer) Gets or sets the numerical ID for the units of measurement applied to the prior to failure interval.

On Condition Task (Upon Detection)

• OnCondDurationModelID (as integer) Gets the ID of the model that describes the duration of the task.
• OnCondCrewIDs (as integer()) Gets the IDs of the crews assigned to the task.
• OnCondPoolID (as integer) Gets the IDs of the pool assigned to the task.
• OnCondBringSystemDown (as boolean) Gets or sets whether the task brings a system down.
• OnCondBringItemDown (as boolean) Gets or sets whether the task brings an item down.
• OnCondPerformTaskEvenIfItBringsSysDown (as boolean) Gets or sets whether the task should be performed if bringing the item down causes the system to go down.
• OnCondPerformTaskEvenIfItemAlreadyFailed (as boolean) Gets or sets whether the task should be performed if it has already failed.
• OnCondResFactorValue (as double) Gets or sets the corrective task's Restoration Amount (0.9 = 90% restoration).
• OnCondResFactorType (as TaskRestorationTypeEnum) Gets or sets the enumeration for the damage the restoration applies to (i.e., all damage or only damage since last repair.

RCM

• Status (as string) Gets or sets the status of the task.
• PropInterval (as object) Gets or sets the task's Proposed Interval value.
• PropIntervalUnitID (as integer) Gets or sets numerical ID for the units of measurement applied to the Proposed Interval.
• RefDoc (as string) Gets or sets the reference document that provides more detailed information about the task.
• Condition (as string) Gets or sets the condition that indicates that a failure will occur.
• TaskZone (as string) Gets or sets the zone in which the task will be performed.
• TaskAccess (as string) Gets or sets the access that will be required in order to perform the task.
• UDT1 (as object) Gets or sets the Task User Date 1. Returns object of the System.Date type.
• UDT2 (as object) Gets or sets the Task User Date 2. Returns object of the System.Date type.
• UN1 (as object) Gets or sets the Task User Number 1. Returns object of the System.Double type.
• UN2 (as object) Gets or sets the Task User Number 2. Returns object of the System.Double type.
• UDD1 (as string) Gets or sets the Task User Drop-Down 1. (Limited to 50 characters.)
• UDD2 (as string) Gets or sets the Task User Drop-Down 2. (Limited to 50 characters.)

Methods

Set/Return Item Properties

• ItemCategoryID(Integer) Gets or sets the category ID. *
• ItemPartNumber(String) Gets or sets the part number. *
• ItemVersion(String) gets or sets the version. *
• ItemSupplier(String) Gets or sets the supplier. *
• ItemApplication(String) Gets or sets the application of the item. *
• ItemDescription(String) Gets or sets the description. *
• ItemComments(String) Gets or sets the comments. *
• ItemKeywords(String) Gets or sets the key words. *