cScheduledTask Class

The cScheduledTask class allows you to choose or create multiple scheduled tasks for the URD. Each task may be a preventive maintenance, inspections or on condition task. The tasks are displayed in their priority order, which is the order in which they will be performed.

Constructors

• cScheduledTask Creates a new scheduled task.

Properties

General

• Name (as string) Sets or gets the task's Name.
• TaskClass (as TaskClassEnum) Gets or sets the task's class (i.e., preventive task).
• TaskTypeID (as integer) Gets or sets the numerical ID of the task's Type (e.g., restoration, condition based).
• DiagramIDs (as integer() ) Gets an array of numerical IDs for the diagrams the task is assigned to. (Note: May be removed/hidden.)

Task Scheduling

• TaskFrequencyIDOrig (as TaskFrequencyEnum) Gets the ID of the task frequency unit as task frequency enumeration for which the resource belongs to. (Note: May be removed/hidden.)
• TaskFrequencyUnitIDOrig (as integer) Gets the ID of the task frequency unit for which the resource belongs to. (Note:May be removed/hidden.)
• TaskFrequencyUnitID (as integer) Gets the numerical ID of the units of measurement for the intervals at which the task is performed.
• TaskFrequencyValueOrig (as double) Sets or gets task frequency. (Note:May be removed/hidden.)
• TaskFrequencyValue (as double) Sets or gets the Fixed Interval when the task is performed based on item age.
• TaskFreqValueVariableIDOrig (as integer) Gets the ID of the task frequency unit variable for which the resource belongs to. (Note: May be removed/hidden.)
• TaskFreqValueVariableID (as integer) Gets the numerical ID of the variable that represents the Fixed Interval when the task is performed based on item age.)
• Intervals (as double()) Gets an array of interval start values when the task is performed based on dynamic intervals.
• PackageID (as integer) Gets the numerical ID of the task package that will override this task's scheduling properties (0 = no override). (Note: May be removed/hidden.)
• GroupIDs (as integer()) Gets an array of numerical IDs for maintenance groups when task performance is based on maintenance groups. (Note:May be removed/hidden.)
• MaintenanceTriggers (as integer) Gets the value of the maintenance trigger the resource belongs to. (Note: May be removed/hidden.)

Basic Task Properties

• OnCondDurationModelID (as integer) Gets the ID of the prior to failure interval for which the resource belongs to.
• OnCondCrewIDs (as integer()) Gets the IDs of the crews assigned that the resource belongs to.
• OnCondPoolID (as integer) Gets the IDs of the pool assigned that the resource belongs to.

Task Consequences

• OnCondBringSystemDown (as boolean) Whether or not the task brings a system down.
• OnCondBringItemDown (as boolean) Whether or not the task brings an item down.
• OnCondPerformTaskEvenIfItBringsSysDown (as boolean) Whether or not you still perform the task if bringing the item down causes the system to go down.
• PerformTaskEvenIfItemAlreadyFailed (as boolean) Whether or not the task should be performed if it has already failed.

Restoration

• OnCondResFactorType (as TaskRestorationTypeEnum) Sets or gets the type for the restoration enumeration the resource belongs to.
• OnCondResFactorValue (as double) Sets or gets the value for the restoration amount the resource belongs to.

Additional Costs to Consider

• OCMiscCostModelID (as integer) Gets the ID of the miscellaneous cost model based on the cost per task and downtime rate the resource belongs to.
• OCMiscCostPerTimeModelID (as integer) Gets the ID of the miscellaneous cost per unit of time model that the resource belongs to.

Failure Detection

• OnCondFailureDetectionThreshold (as double) Gets the value for the failure detection threshold interval for which the resource belongs to.
• OnCondUsePFInterval (as boolean) Whether or not the prior to failure interval should be used.
• OnCondPFInterval (as double) Gets the value for the prior to failure interval for which the resource belongs to.
• OnCondPFIntervalUnitID (as integer) Gets the ID of the prior to failure interval for which the resource belongs to.

RCM

• Status (as string) Sets or gets the status of the resource (the one used in the repository)
• PropInterval (as object) Sets or gets the internal type (the one used in the repository)
• PropIntervalUnitID (as integer) Sets or gets ID of the interval unit type (the one used in the repository)
• RefDoc (as string) Sets or gets the reference document that provides more detailed information about the task of the resource (the one used in the repository)
• Condition (as string) Sets or gets the condition that indicates that a failure will occur of the resource (the one used in the repository)
• TaskZone (as string) Sets or gets the zone in which the task will be performed of the resource (the one used in the repository)
• TaskAccess (as string) Sets or gets the access that will be required in order to perform the task of the resource (the one used in the repository)
• UDT1 (as object) Sets or returns the Task User Date 1. Returns object of the System.Date type.
• UDT2 (as object) Sets or returns the Task User Date 2. Returns object of the System.Date type.
• UN1 (as object) Sets or returns the Task User Number 1. Returns object of the System.Double type.
• UN2 (as object) Sets or returns the Task User Number 2. Returns object of the System.Double type.
• UDD1 (as string) Sets or returns the Task User Drop-Down 1. (Limited to 50 characters.)
• UDD2 (as string) Sets or returns the Task User Drop-Down 2. (Limited to 50 characters.)