cScheduledTask Class

From ReliaWiki
Revision as of 17:01, 8 October 2015 by Kate Racaza (talk | contribs)
Jump to navigation Jump to search
APIWiki.png


Member of: SynthesisAPI


Represents a scheduled task resource. The task may be a preventive maintenance, inspection or on condition task.

Constructors

Name Description
cScheduledTask Creates an instance of the cSheduledTask class.
cScheduledTask() A parameterized constructor for the cScheduledTask class. (.NET only)


Methods

Name Description
SetCrewIDs Returns an array containing the numeric IDs of the crews assigned to the task. Long.
GetCrewIDs Assigns crews to the task.


Properties

Name Description
BringItemDown Indicates whether the task brings the item down. Boolean
BringSystemDown Indicates whether the task brings the system down. Boolean
Condition Gets or sets a description of the condition that indicates that a failure will occur (for reliability centered maintenance analysis), such as a threshold for a measurement of wear, vibration, etc. String.
CrewIDs() Gets or sets an array containing the numeric IDs of the crews assigned to the task. Long
DiagramIDs() Gets an array containing the numeric IDs of the diagrams the task is assigned to. Long.
DurationModelID Gets or sets the numeric ID of the model that represents the duration of the task. Integer
GroupIDs() Gets an array containing the numeric IDs of the selected maintenance groups when the task is performed based on maintenance groups. Long.
Intervals() Gets or sets an array containing the interval start values when the task is performed based on dynamic intervals. Double.
ItemApplication Gets or sets the item's application. (Synthesis identifier) String
ItemCategoryID Gets or sets the category ID. (Synthesis identifier) Integer
ItemComments Gets or sets the comments. (Synthesis identifier) String
ItemDescription Gets or sets the description. (Synthesis identifier) String
ItemKeywords Gets or sets the keywords. (Synthesis identifier) String
ItemPartNumber Gets or sets the part number. (Synthesis identifier) String
ItemSupplier Gets or sets the supplier name. (Synthesis identifier) String
ItemVersion Gets or sets the version number. (Synthesis identifier) String
MaintenanceTriggers Gets or sets the value of the maintenance trigger assigned to the task. Integer.
MiscCostModelID Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to preventive and inspection tasks. Integer.
MiscCostPerTimeModelID Gets or sets the numeric ID of the model that represents the task's downtime rate ($/Hr). Applies to preventive and inspection tasks. Integer.
Name Gets or sets the task's name. String.
OCMiscCostModelID Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to on condition tasks upon detection. Integer.
OCMiscCostPerTimeModelID Gets or sets the numeric ID of the model that represents the task's downtime rate($/Hr). Applies to on condition tasks upon detection.Integer.
OnCondBringItemDown Indicates whether the task brings the item down. Applies to on condition tasks upon detection. Boolean.
OnCondBringSystemDown Indicates whether the task brings the system down. Applies to on condition tasks upon detection. Boolean
OnCondCrewIDs() Gets or sets an array containing the numeric IDs of the crews assigned to the task. Applies to on condition tasks upon detection. Long.
OnCondDurationModelID Gets the numeric ID of the model that represents the duration of the task. Applies to on condition tasks upon detection. Integer.
OnCondFailureDetectionThreshold Gets or sets the value for the task's failure detection threshold interval (0.9 = 90% percent of life). Double.
OnCondPerformTaskEvenIfItBringsSysDown Indicates whether the task should be performed if bringing the item down causes the system to go down. Boolean
OnCondPFInterval Gets or sets the value for the task's prior-to-failure (P-F) interval. Double.
OnCondPFIntervalUnitID Gets or sets the numeric ID of the unit of measurement applied to the P-F interval. Integer.
OnCondPoolID Gets or sets the numeric ID of the spare part pool assigned to the on condition task. Integer.
OnCondResFactorValue Gets or sets the on condition task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double.
OnCondResFactorType Gets or set a value from the TaskRestorationTypeEnum enumeration, which specifies the damage the restoration applies to (i.e., restores all accumulated damage or restores only damage accumulated since last repair).
OnCondUsePFInterval Indicates whether the prior-to-failure (P-F) interval should be used to detect imminent failures. Boolean. If true, specify a value for OnCondPFInterval; if false, specify a value for OnCondFailureDetectionThreshold.
PackageID Gets the numeric ID of the task package that will override the task's scheduling properties (0 = no override). Integer.
PerformTaskEvenIfItBringsSysDown Indicates whether the task should be performed if bringing the item down causes the system to go down. Boolean
PerformTaskEvenIfItemAlreadyFailed Indicates whether the task should be performed even if the item failed before the task was scheduled to occur. Boolean
PoolID Gets or sets the numeric ID of the spare part pool assigned to the task. Integer.
PropInterval Gets or sets the interval value that was initially proposed for the task (for reliability centered maintenance analysis). Variant.
PropIntervalUnitID Gets or sets numeric ID for the unit of measurement applied to the proposed interval. Integer.
RefDoc Gets or sets the description for the reference document that provides more detailed information about the task (for reliability centered maintenance analysis). String.
ResFactorType Gets or sets a value from the TaskRestorationTypeEnum enumeration, which specifies the damage the restoration applies to (i.e., restores all accumulated damage or restores only damage accumulated since last repair).
ResFactorValue Gets or sets the scheduled task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double.
Status Gets or sets the status of the task (for reliability centered maintenance analysis). String.
TaskAccess Gets or sets the access that will be required in order to perform the task (typically for aircraft MSG-3 analyses). String.
TaskClass Gets or set one of the values of the TaskClassEnum, which specifies the task's class (e.g., preventive task, inspection or on condition).
TaskFrequencyUnitID Gets or sets the numeric ID of the unit of measurement of the intervals at which the task is performed. Integer.
TaskFrequencyValue Gets or sets the fixed interval at which the task is performed. Double.
TaskFreqValueVariableID Gets the numeric ID of the variable that represents the fixed interval at which the task is performed. Integer.
TaskTypeID Gets or sets the numeric ID of the task's class. Integer.
TaskZone Gets or sets the zone of the system in which the task will be performed (aircraft MSG-3 analyses). String.
UDD1 Gets or sets the first user-defined drop-down field. (Limited to 50 characters.) String.
UDD2 Gets or sets the second user-defined drop-down field. (Limited to 50 characters.) String.
UDT1 Gets or sets the first user-defined date field. Variant.
UDT2 Gets or sets the second user-defined date field. Variant.
UN1 Gets or sets the first user-defined number field. Variant.
UN2 Gets or sets the second user-defined number field. Variant.
TaskFrequencyIDOrig   Deprecated   Gets a value from the TaskFrequencyEnum, which specifies the frequency at which a task is performed.
TaskFrequencyUnitIDOrig   Deprecated   Gets the numeric ID for the original unit of measurement of the intervals at which the task is performed. Integer.
TaskFrequencyValueOrig   Deprecated   Gets or sets the original fixed interval when the task is performed based on item age. Double.
TaskFreqValueVariableIDOrig   Deprecated   Gets the numeric ID of the variable that originally represented the fixed interval when the task is performed based on item age. Integer.