cScheduledTask Class

Member of: SynthesisAPI

Represents a scheduled task resource. The task may be a preventive maintenance, inspection or on condition task.

Constructors

Name	Description
cScheduledTask	Creates an instance of the cSheduledTask class.
cScheduledTask()	A parameterized constructor for the cScheduledTask class. (.NET only)

Methods

Name	Description
GetCrewIDs	Returns an array containing the numeric IDs of the crews assigned to the task. Long.
SetCrewIDs	Assigns crews to the task.

Properties

Name	Description
BringItemDown	Indicates whether the task brings the item down. Boolean
BringSystemDown	Indicates whether the task brings the system down. Boolean
Condition	Gets or sets a description of the condition that indicates that a failure will occur (for reliability centered maintenance analysis), such as a threshold for a measurement of wear, vibration, etc. String.
CrewIDs()	Gets or sets an array containing the numeric IDs of the crews assigned to the task. Long
DiagramIDs()	Gets an array containing the numeric IDs of the diagrams the task is assigned to. Long.
DurationModelID	Gets or sets the numeric ID of the model that represents the duration of the task. Integer
GroupIDs()	Gets an array containing the numeric IDs of the selected maintenance groups when the task is performed based on maintenance groups. Long.
ID	Gets the numeric ID of the task. Integer.
Intervals()	Gets or sets an array containing the interval start values when the task is performed based on dynamic intervals. Double.
ItemApplication	Gets or sets the item's application. (Synthesis identifier) String
ItemCategoryID	Gets or sets the category ID. (Synthesis identifier) Integer
ItemComments	Gets or sets the comments. (Synthesis identifier) String
ItemDescription	Gets or sets the description. (Synthesis identifier) String
ItemKeywords	Gets or sets the keywords. (Synthesis identifier) String
ItemPartNumber	Gets or sets the part number. (Synthesis identifier) String
ItemSupplier	Gets or sets the supplier name. (Synthesis identifier) String
ItemVersion	Gets or sets the version number. (Synthesis identifier) String
MaintenanceTriggers	Gets or sets the value of the maintenance trigger assigned to the task. Integer.
MiscCostModelID	Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to preventive and inspection tasks. Integer.
MiscCostPerTimeModelID	Gets or sets the numeric ID of the model that represents the task's downtime rate ($/Hr). Applies to preventive and inspection tasks. Integer.
Name	Gets or sets the task's name. String.
OCMiscCostModelID	Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to on condition tasks upon detection. Integer.
OCMiscCostPerTimeModelID	Gets or sets the numeric ID of the model that represents the task's downtime rate($/Hr). Applies to on condition tasks upon detection.Integer.
OnCondBringItemDown	Indicates whether the task brings the item down. Applies to on condition tasks upon detection. Boolean.
OnCondBringSystemDown	Indicates whether the task brings the system down. Applies to on condition tasks upon detection. Boolean
OnCondCrewIDs()	Gets or sets an array containing the numeric IDs of the crews assigned to the task. Applies to on condition tasks upon detection. Long.
OnCondDurationModelID	Gets the numeric ID of the model that represents the duration of the task. Applies to on condition tasks upon detection. Integer.
OnCondFailureDetectionThreshold	Gets or sets the value for the task's failure detection threshold interval (0.9 = 90% percent of life). Double.
OnCondPerformTaskEvenIfItBringsSysDown	Indicates whether the task should be performed if bringing the item down causes the system to go down. Boolean
OnCondPFInterval	Gets or sets the value for the task's prior-to-failure (P-F) interval. Double.
OnCondPFIntervalUnitID	Gets or sets the numeric ID of the unit of measurement applied to the P-F interval. Integer.
OnCondPoolID	Gets or sets the numeric ID of the spare part pool assigned to the on condition task. Integer.
OnCondResFactorValue	Gets or sets the on condition task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double.
OnCondResFactorType	Gets or set a value from the TaskRestorationTypeEnum enumeration, which specifies the damage the restoration applies to (i.e., restores all accumulated damage or restores only damage accumulated since last repair).
OnCondUsePFInterval	Indicates whether the prior-to-failure (P-F) interval should be used to detect imminent failures. Boolean. If true, specify a value for OnCondPFInterval; if false, specify a value for OnCondFailureDetectionThreshold.
PackageID	Gets the numeric ID of the task package that will override the task's scheduling properties (0 = no override). Integer.
PerformTaskEvenIfItBringsSysDown	Indicates whether the task should be performed if bringing the item down causes the system to go down. Boolean
PerformTaskEvenIfItemAlreadyFailed	Indicates whether the task should be performed even if the item failed before the task was scheduled to occur. Boolean
PoolID	Gets or sets the numeric ID of the spare part pool assigned to the task. Integer.
ProjectID	Gets the numeric ID of the project the task belongs to. Integer.
PropInterval	Gets or sets the interval value that was initially proposed for the task (for reliability centered maintenance analysis). Variant.
PropIntervalUnitID	Gets or sets numeric ID for the unit of measurement applied to the proposed interval. Integer.
RefDoc	Gets or sets the description for the reference document that provides more detailed information about the task (for reliability centered maintenance analysis). String.
ResFactorType	Gets or sets a value from the TaskRestorationTypeEnum enumeration, which specifies the damage the restoration applies to (i.e., restores all accumulated damage or restores only damage accumulated since last repair).
ResFactorValue	Gets or sets the scheduled task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double.
Status	Gets or sets the status of the task (for reliability centered maintenance analysis). String.
TaskAccess	Gets or sets the access that will be required in order to perform the task (typically for aircraft MSG-3 analyses). String.
TaskClass	Gets or set one of the values of the TaskClassEnum, which specifies the task's class (e.g., preventive task, inspection or on condition).
TaskFrequencyID	Gets or sets a value from the TaskFrequencyEnum, which specifies the frequency at which the task is performed.
TaskFrequencyUnitID	Gets or sets the numeric ID of the unit of measurement of the intervals at which the task is performed. Integer.
TaskFrequencyValue	Gets or sets the fixed interval at which the task is performed. Double.
TaskFreqValueVariableID	Gets the numeric ID of the variable that represents the fixed interval at which the task is performed. Integer.
TaskTypeID	Gets or sets the numeric ID of the task's class. Integer.
TaskZone	Gets or sets the zone of the system in which the task will be performed (aircraft MSG-3 analyses). String.
UDD1	Gets or sets the first user-defined drop-down field. (Limited to 50 characters.) String.
UDD2	Gets or sets the second user-defined drop-down field. (Limited to 50 characters.) String.
UDT1	Gets or sets the first user-defined date field. Variant.
UDT2	Gets or sets the second user-defined date field. Variant.
UN1	Gets or sets the first user-defined number field. Variant.
UN2	Gets or sets the second user-defined number field. Variant.