Example: Weibull++ Standard Folio Data 1P-Weibull: Difference between revisions

Revision as of 10:29, 26 July 2012

@@ Line 1: / Line 1: @@
-{{Banner Weibull Examples}}
+[[Category: For Deletion]]
-==Example: Weibull++ Standard Folio Data 1P-Weibull==
-Six prototypes of a system were tested. The failure times are 16, 34, 53, 75, 93 and 120. Due to the small sample size, 1P-Weibull is chosen to model the data. According to previous similar products, the slope parameter <math>\beta </math>  is set to 1.5. Choose the 1P-Weibull distribution in Weibull++ and calculate it, the results are given below.
-===Solution===
-* Estimated model parameters:
-[[Image:1P Weibull Parameters.png|center]]
-* Probability plot:
-[[Image:1P Weibull PPlot.png|center|400px]]
-* Use QCP to predict reliability:
-[[Image:1P Weibull QCP.png|center|400px]]
-The above figure shows the reliability at 15 hours is 0.9054, and its two-sided confidence bounds at confidence level of 90% are 0.7619 and 0.9644.