Failure Times Crow-AMSAA Example

From ReliaWiki
Jump to navigation Jump to search
RGA Examples Banner.png


New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.

As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at RGA examples and RGA reference examples.




This example appears in the Reliability Growth and Repairable System Analysis Reference.


A prototype of a system was tested at the end of one of its design stages. The test was run for a total of 300 hours and 27 failures were observed. The table below shows the collected data set. The prototype has a design specification of an MTBF equal to 10 hours with a 90% confidence level at 300 hours. Do the following:

  1. Estimate the parameters of the Crow-AMSAA model using maximum likelihood estimation.
  2. Does the prototype meet the specified goal?
Failure Times Data
2.6 56.5 98.1 190.7
16.5 63.1 101.1 193
16.5 70.6 132 198.7
17 73 142.2 251.9
21.4 77.7 147.7 282.5
29.1 93.9 149 286.1
33.3 95.5 167.2

Solution

  1. The next figure shows the parameters estimated using RGA.
    Estimated parameters of the Crow-AMSAA model.
  2. The instantaneous MTBF with one-sided 90% confidence bounds can be calculated using the Quick Calculation Pad (QCP), as shown next. From the QCP, it is estimated that the lower limit on the MTBF at 300 hours with a 90% confidence level is equal to 10.8170 hours. Therefore, the prototype has met the specified goal.
    Instantaneous MTBF with one-sided 90% confidence bounds.