Grouped Data Reference Example: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 42: Line 42:
{{Reference_Example_Heading4|RGA}}
{{Reference_Example_Heading4|RGA}}


In RGA, the Crow-AMSAA (NHPP) model with maximum likelihood parameter estimation (MLE) method was used to calculate the results:
In RGA, the Crow-AMSAA (NHPP) model with the maximum likelihood parameter estimation (MLE) method was used to calculate the results:


*The model parameters are:


[[image:MIL-HDBK-189A 6.3.1.7.5 Example_Results.png|center]]
[[image:MIL-HDBK-189A 6.3.1.7.5 Example_Results.png|center]]




*


[[image:MIL-HDBK-189A 6.3.1.7.5 Example_Stats.png|center]]
[[image:MIL-HDBK-189A 6.3.1.7.5 Example_Stats.png|center]]


The falure rate vs. time plot:


[[image:MIL-HDBK-189A 6.3.1.7.5 Example_Plot.png|center|550px]]
[[image:MIL-HDBK-189A 6.3.1.7.5 Example_Plot.png|center|550px]]

Revision as of 16:49, 13 June 2014

RGA Reference Examples Banner.png


New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.

As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at RGA examples and RGA reference examples.




Grouped Data Reference Example

This example compares the results for grouped data.


Reference Case

MIL-HDBK -189A, Section 6.3.1.7.5, pg. 162, 2009.


Data

The following table shows the data.

Failures in Interval Interval End Time
13 20
16 40
5 60
8 80
7 100
Termination Time = 100 hours


Result

The book has the following results:

  • Beta = 0.753, Lambda = 1.53
  • DMTBF = 2.6 hours
  • [math]\displaystyle{ \,\!X^{2} }[/math] = 5.5, critical value = 7.8 (Assume significance level = 0.1. Since [math]\displaystyle{ \,\!X^{2} }[/math] < critical value can fail to reject hypothesis that the Crow-AMSAA model fits the data).


Results in RGA

In RGA, the Crow-AMSAA (NHPP) model with the maximum likelihood parameter estimation (MLE) method was used to calculate the results:

  • The model parameters are:
MIL-HDBK-189A 6.3.1.7.5 Example Results.png


MIL-HDBK-189A 6.3.1.7.5 Example Stats.png


The falure rate vs. time plot:

MIL-HDBK-189A 6.3.1.7.5 Example Plot.png