# Mixed Weibull Example

*This example appears in the Life Data Analysis Reference book*.

We will illustrate the mixed Weibull analysis using a Monte Carlo generated set of data. To repeat this example, generate data from a 2-parameter Weibull distribution using the Weibull++ Monte Carlo utility. The following figures illustrate the required steps, inputs and results.

In the Monte Carlo window, enter the values and select the options shown below for subpopulation 1.

Switch to subpopulation 2 and make the selection shown below. Click **Generate**.

The simulation settings are:

After the data set has been generated, choose the 2 Subpop-Mixed Weibull distribution. Click **Calculate**.

The results for subpopulation 1 are shown next. (Note that your results could be different due to the randomness of the simulation.)

The results for subpopulation 2 are shown next. (Note that your results could be different due to the randomness of the simulation.)

The Weibull probability plot for this data is shown next. (Note that your results could be different due to the randomness of the simulation.)