Non-Parametric RDA Transmission Example: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(updated example)
(Blanked the page)
Tag: Blanking
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<noinclude>{{Banner Weibull Examples}}
''This example appears in the [[Recurrent_Event_Data_Analysis#Non-Parametric_Recurrent_Event_Data_Analysis|Life Data Analysis Reference book]]''.


</noinclude>'''Transmission Example'''
The following table shows the repairs in a pre-production road test on a sample of 14 cars with manual transmissions [[Appendix: Weibull References|[31]]]. Here, the + sign denotes the censoring ages (how long a car has been observed).
<center><math>\begin{matrix}
  Car ID & Mileage  \\
  \text{1} & \text{27099+}  \\
  \text{2} & \text{21999+}  \\
  \text{3} & \text{11891, 27583+}  \\
  \text{4} & \text{19966+}  \\
  \text{5} & \text{26146+}  \\
  \text{6} & \text{3648, 13957, 23193+}  \\
  \text{7} & \text{19823+}  \\
  \text{8} & \text{2890, 22707+}  \\
  \text{9} & \text{2714, 19275+}  \\
  \text{10} & \text{19803+}  \\
  \text{11} & \text{19630+}  \\
  \text{12} & \text{22056+}  \\
  \text{13} & \text{22940+}  \\
  \text{14} & \text{3240, 7690, 18965+}  \\
\end{matrix}</math></center>
The car manufacturer seeks to estimate the mean cumulative number of repairs per car by 24,000 test miles (equivalently 5.5 x 24,000 = 132,000 customer miles) and to observe whether the population repair rate increases or decreases as the population ages.
<br>'''Solution'''
Enter the data into a non-parametric RDA folio in Weibull++, as follows.
[[Image:Recurrent Data Example 3 Data.png|center|650px]]
The results are as follows.
[[Image:Recurrent Data Example 3 Result.png|center|650px]]
The results indicate that after 13,957 miles of testing, the estimated mean cumulative number of repairs per car is 0.5. Therefore, by 24,000 test miles, the estimated mean cumulative number of repairs per car is 0.5.
The MCF plot is shown next.
[[Image:Recurrent Data Example 3 Plot.png|center|550px]]
A smooth curve through the MCF plot has a derivative that decreases as the population ages. That is, the repair rate decreases as each population ages. This is typical of products with manufacturing defects.

Latest revision as of 17:49, 23 May 2023