Perform Accelerated Life Testing Data Analysis with Stress Profiles: Difference between revisions
Kate Racaza (talk | contribs) No edit summary |
Kate Racaza (talk | contribs) No edit summary |
||
| Line 16: | Line 16: | ||
|Start||End||Stress | |Start||End||Stress | ||
|- | |- | ||
|0||200|| | |0||200||124 | ||
|- | |- | ||
|200||300||175 | |200||300||175 | ||
Latest revision as of 18:55, 3 April 2017
 |
If you have ALTA PRO, you can use the Synthesis API to analyze an ALTA data set with time-dependent stress profiles. In this tutorial, you will learn how to define stress profiles, analyze an ALTA data set, and obtain analysis results from the model.
Note that this tutorial is for demonstration purposes only; it doesn't take efficiency into account and doesn't include any exception handling.
Tutorial: Accelerated Life Testing Data Analysis - Stress Profiles
This example demonstrates how to use the Synthesis API to analyze an ALTA data set with a single stress profile and obtain an estimate of the B1 life (i.e., time at which reliability is equal to 99%). A discussion of the example follows. The VBA version of the code sample is available here.
The data sets used in this example are:
| Start | End | Stress |
| 0 | 200 | 124 |
| 200 | 300 | 175 |
| 300 | 350 | 200 |
| 350 | 375 | 250 |
| Number in State | State | Time to F or S |
| 1 | F | 252 |
| 1 | F | 280 |
| 1 | F | 320 |
| 1 | S | 328 |
| 1 | F | 335 |
| 1 | F | 354 |
| 1 | F | 361 |
| 1 | F | 362 |
| 1 | F | 368 |
| 3 | S | 375 |
VB.NET Imports SynthesisAPI Module Module1 Sub Main() 'Declare a new stress profile and define its properties. Dim myProfile As New cProfile ("stressProfile") myProfile.ProfileType = ProfileTypeEnum.Stress myProfile.IsCyclical = False 'Define four segments for the stress profile. Dim listofsegments() As ProfileSegment = { New ProfileSegment With {.SegmentEnd = 200, .Value = 124}, New ProfileSegment With {.SegmentEnd = 300, .Value = 175}, New ProfileSegment With {.SegmentEnd = 350, .Value = 200}, New ProfileSegment With {.SegmentEnd = 375, .Value = 250} } 'Add the segments to the stress profile. myProfile.SetSegments(listofsegments) 'Declare a new ALTADataSet object. Dim ADS As New ALTADataSet 'Assign the stress profile to the data set. ADS.AddStressProfile(myProfile) 'The stress profile uses the logarithmic (power LSR) stress transformation 'and has a use stress level = 100. ADS.AddStressDefinition("Stress1", ALTASolverLSR.Power, 100) 'Add the failure times to the data set. ADS.AddFailure(252, 1, myProfile) ADS.AddFailure(280, 1, myProfile) ADS.AddFailure(320, 1, myProfile) ADS.AddFailure(335, 1, myProfile) ADS.AddFailure(354, 1, myProfile) ADS.AddFailure(361, 1, myProfile) ADS.AddFailure(362, 1, myProfile) ADS.AddFailure(368, 1, myProfile) 'Add the suspensions to the data set. ADS.AddSuspension(328, 1, myProfile) ADS.AddSuspension(375, 3, myProfile) 'Use the cumulative damage - Weibull model to analyze the data set. 'Keep all other analysis settings at default. ADS.AnalysisSettings.ModelType = ALTASolverModel.CumDamage ADS.AnalysisSettings.Distribution = ALTASolverDistribution.Weibull 'Analyze the data set. ADS.Calculate() 'Calculate the B1 life and display the result. Dim r As Double r = ADS.FittedModel.Time(.99) MsgBox("B1 Life: " & r) End Sub End Module
Discussion
The cProfile class represents a time-dependent stress profile. The IsCyclical property is set to False, indicating that all times after the last segment will use the stress value defined in the last segment.
'Declare a new stress profile and define its properties. Dim myProfile As New cProfile ("stressProfile") myProfile.ProfileType = ProfileTypeEnum.Stress myProfile.IsCyclical = False
The ProfileSegment class represents the segments of the associated cProfile object. In this example, the stresses are increased in a stepwise fashion.
'Define four segments for the stress profile. Dim listofsegments() As ProfileSegment = { New ProfileSegment With {.SegmentEnd = 200, .Value = 124}, New ProfileSegment With {.SegmentEnd = 300, .Value = 175}, New ProfileSegment With {.SegmentEnd = 350, .Value = 200}, New ProfileSegment With {.SegmentEnd = 375, .Value = 250} }
After the segments are defined, they are added to the stress profile.
'Add the segments to the stress profile.
myProfile.SetSegments(listofsegments)
Next, create an ALTA data set by declaring a new ALTADataSet object, and then using the AddStressProfile method to associate the stress profile with the object.
'Declare a new ALTADataSet object. Dim ADS As New ALTADataSet 'Assign the stress profile to the data set. ADS.AddStressProfile(myProfile)
Use the AddStressDefinition method to define the name, stress transformation and use stress level of the stress profile.
'The stress profile uses the logarithmic (power LSR) stress transformation 'and has a use stress level = 100. ADS.AddStressDefinition("Stress1", ALTASolverLSR.Power, 100)
The data set can contain failures, suspensions or interval data. The following example shows how to use the AddFailure method and AddSuspension method to add the stress profile to the data points.
'Add the failure times to the data set. ADS.AddFailure(252, 1, myProfile) ADS.AddFailure(280, 1, myProfile) ADS.AddFailure(320, 1, myProfile) ADS.AddFailure(335, 1, myProfile) ADS.AddFailure(354, 1, myProfile) ADS.AddFailure(361, 1, myProfile) ADS.AddFailure(362, 1, myProfile) ADS.AddFailure(368, 1, myProfile) 'Add the suspensions to the data set. ADS.AddSuspension(328, 1, myProfile) ADS.AddSuspension(375, 3, myProfile)
The AnalysisSetting property stores a reference to the ALTAAnalysisOptions object, which represents the analysis settings of the data set. In this example, we use the property to change some of the attributes of the object.
'Use the cumulative damage - Weibull model to analyze the data set. 'Keep all other analysis settings at default. ADS.AnalysisSettings.ModelType = ALTASolverModel.CumDamage ADS.AnalysisSettings.Distribution = ALTASolverDistribution.Weibull
Use the Calculate method to analyze the data set.
'Analyze the data set.
ADS.Calculate()
The FittedModel property gets the cModel object that represents the fitted model of the analysis. From the model, you can calculate useful metrics such as reliability, failure rate, mean time, etc. In this example, we use the cModel.Time method to calculate for the B1 life.
'Calculate the B1 life and display the result. Dim r As Double r = ADS.FittedModel.Time(.99) MsgBox("B1 Life: " & r)
Notes
For analyses that require multiple stress profiles, the number of stress definitions must be equal to the number of stress profiles used in the analysis. For example:
'Define two stress profiles. Dim myProfile1 As New cProfile Dim myProfile2 As New cProfile ... 'Assign the stress profiles to a data set. Dim ADS As New ALTADataSet ADS.AddStressProfile(myProfile1) ADS.AddStressProfile(myProfile2) 'Define the stress transformations and use stress levels. ADS.AddStressDefinition("Stress1", ALTASolverLSR.Arrhenius, 100) ADS.AddStressDefinition("Stress2", ALTASolverLSR.Power, 4) ... 'Add failure times. ADS.AddFailure(171, 1, SP1, SP2) ADS.AddFailure(174, 1, SP1, SP2) ...