Reliability Importance Example: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Created page with '<noinclude>{{Banner BlockSim Examples}} ''This example appears in the article Reliability Importance''. </noinclude> '''Example: Reliability Importance Measures for Failure …')
 
No edit summary
Line 3: Line 3:


</noinclude>
</noinclude>
'''Example: Reliability Importance Measures for Failure Modes'''
'''Reliability Importance Measures for Failure Modes'''


Assume that a system has failure modes  <math>A</math> ,  <math>B</math> ,  <math>C</math> ,  <math>D</math> ,  <math>E</math>  and  <math>F</math>. Furthermore, assume that failure of the entire system will occur if:
Assume that a system has failure modes  <math>A</math> ,  <math>B</math> ,  <math>C</math> ,  <math>D</math> ,  <math>E</math>  and  <math>F</math>. Furthermore, assume that failure of the entire system will occur if:

Revision as of 23:55, 20 August 2012

BlockSim Examples Banner.png


New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.

As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at BlockSim examples and BlockSim reference examples.




This example appears in the article Reliability Importance.


Reliability Importance Measures for Failure Modes

Assume that a system has failure modes [math]\displaystyle{ A }[/math] , [math]\displaystyle{ B }[/math] , [math]\displaystyle{ C }[/math] , [math]\displaystyle{ D }[/math] , [math]\displaystyle{ E }[/math] and [math]\displaystyle{ F }[/math]. Furthermore, assume that failure of the entire system will occur if:

• Mode [math]\displaystyle{ B }[/math] , [math]\displaystyle{ C }[/math] or [math]\displaystyle{ F }[/math] occurs.
• Modes [math]\displaystyle{ A }[/math] and [math]\displaystyle{ E }[/math] , [math]\displaystyle{ A }[/math] and [math]\displaystyle{ D }[/math] or [math]\displaystyle{ E }[/math] and [math]\displaystyle{ D }[/math] occur.

In addition, assume the following failure probabilities for each mode.

• Modes [math]\displaystyle{ A }[/math] and [math]\displaystyle{ D }[/math] have a mean time to occurrence of 1,000 hours (i.e., exponential with [math]\displaystyle{ MTTF=1,000). }[/math]
• Mode [math]\displaystyle{ E }[/math] has a mean time to occurrence of 100 hours (i.e., exponential with [math]\displaystyle{ MTTF=100). }[/math]
• Modes [math]\displaystyle{ B }[/math] , [math]\displaystyle{ C }[/math] and [math]\displaystyle{ F }[/math] have a mean time to occurrence of 700,000, 1,000,000 and 2,000,000 hours respectively (i.e., exponential with [math]\displaystyle{ MTT{{F}_{B}}=700,000 }[/math], [math]\displaystyle{ MTT{{F}_{C}}=1,000,000 }[/math] and [math]\displaystyle{ MTT{{F}_{F}}=2,000,000). }[/math]

Examine the mode importance for operating times of 100 and 500 hours.


Solution

The RBD for this example is shown next:

BS6ex1.png


The first chart below illustrates [math]\displaystyle{ {{I}_{{{R}_{i}}}}(t=100) }[/math]. It can be seen that even though [math]\displaystyle{ B }[/math] , [math]\displaystyle{ C }[/math] and [math]\displaystyle{ F }[/math] have a much rarer rate of occurrence, they are much more significant at 100 hours. By 500 hours, [math]\displaystyle{ {{I}_{{{R}_{i}}}}(t=500) }[/math] , the effects of the lower reliability components become greatly pronounced and thus they become more important, as can be seen in the second chart. Finally, the behavior of [math]\displaystyle{ {{I}_{{{R}_{i}}}}(t) }[/math] can be observed in the Reliability Importance vs. Time plot. Note that not all lines are plainly visible in the plot due to overlap.


Plot of [math]\displaystyle{ {{I}_{{{R}_{i}}}}(t=100) }[/math]


Plot of [math]\displaystyle{ {{I}_{{{R}_{i}}}}(t=500) }[/math]


Plot of [math]\displaystyle{ {{I}_{{{R}_{i}}}}(t) }[/math]