Template:Alta exponential distribution: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==The Exponential Distribution==
#REDIRECT [[Distributions_Used_in_Accelerated_Testing]]
<br>
 
The exponential distribution is a very commonly used distribution in reliability engineering. Due to its simplicity, it has been widely employed even in cases to which it does not apply. The exponential distribution is used to describe units that have a constant failure rate.
The single-parameter exponential  <math>pdf</math>  is given by:
<br>
 
::<math>\begin{align}
  & f(T)= & \lambda {{e}^{-\lambda T}}=\frac{1}{m}{{e}^{-\tfrac{1}{m}T}} \\
& T\ge  & 0,\lambda >0,m>0 
\end{align}</math>
<br>
 
:where:
::• <math>\lambda =</math> constant failure rate, in failures per unit of measurement, e.g. failures per hour, per cycle, etc.
::• <math>\lambda =\tfrac{1}{m}.</math>
::• <math>m=</math> mean time between failures, or to a failure.
::• <math>T=</math> operating time, life, or age, in hours, cycles, miles, actuations, etc.
<br>
 
This distribution requires the estimation of only one parameter,  <math>\lambda </math> , for its application.
<br>
{{alta statistical properties summary}}
 
{{characteristics of the exponential distribution alta}}

Latest revision as of 01:08, 16 August 2012