Template:Bayesian test design: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Redirected page to Reliability Test Design)
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Bayeisan Nonparameteric Test Design==
#REDIRECT [[Reliability Test Design]]
 
The nonparametric analysis performed in the last section made no assumptions about the underlying distribution of the data and was performed with only the immediate data at hand.  However, if prior information regarding system performance is available, it can be incorporated into a Bayesian nonparametric analysis.  This subsection will demonstrate how to incorporate prior information about system reliability and also how to incorporate prior information from subsystem tests.
 
====Determining system performance====
The values of system reliability ''R'', confidence level ''CL'', number of units tested ''n'', and number of failures ''r'' are related by the equation
 
::<math>1-CL=\text{Beta}\left(R,\alpha,\beta\right)=\text{Beta}\left(R,n-r+\alpha_{0},r+\beta_{0}\right)</math>
 
where Beta is the incomplete Beta function.  If <math>\alpha\,\!_{0}</math> and <math>\beta\,\!_{0}</math> are known, then any quantity of interest can be calculated using the remaining three.  The next two examples demonstrate how to calculate <math>\alpha\,\!_{0}</math> and <math>\beta\,\!_{0}</math> depending on the type of prior information available.
 
{{btd w info on reliability}}
 
{{btd w info from subsystem tests}}

Latest revision as of 08:04, 29 June 2012