Template:Bayesian test design: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Redirected page to Reliability Test Design)
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Bayeisan Nonparameteric Test Design==
#REDIRECT [[Reliability Test Design]]
 
The regular nonparametric analysis performed based on either the Binomial or the Chi-Square equation was performed with only the direct system test data.  However, if prior information regarding system performance is available, it can be incorporated into a Bayesian nonparametric analysis.  This subsection will demonstrate how to incorporate prior information about system reliability and also how to incorporate prior information from subsystem tests into system test design.
 
===Assumption on System Reliability===
If we assume the system reliablity follows a Beta distribuiton, the values of system reliability ''R'', confidence level ''CL'', number of units tested ''n'', and number of failures ''r'' are related by the equation.
 
::<math>1-CL=\text{Beta}\left(R,\alpha,\beta\right)=\text{Beta}\left(R,n-r+\alpha_{0},r+\beta_{0}\right)</math>
 
where Beta is the incomplete Beta function.  If <math>\alpha_{0}</math> and <math>\beta\,\!_{0}</math> are known, then any quantity of interest can be calculated using the remaining three.  The next two examples demonstrate how to calculate <math>\alpha\,\!_{0}</math> and <math>\beta\,\!_{0}</math> depending on the type of prior information available.
 
{{btd w info on reliability}}
 
{{btd w info from subsystem tests}}

Latest revision as of 08:04, 29 June 2012