Template:BlockSim Analytical FT and RBD Plot Examples: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
Line 41: Line 41:
=====Block Probability Density Function=====
=====Block Probability Density Function=====
[[Image:Block Probability Density Function.png|thumb|center|700px|]]
[[Image:Block Probability Density Function.png|thumb|center|700px|]]
=====Block Failure Rate=====
[[Image:Block Failure Rate.png|thumb|center|700px|]]

Revision as of 20:52, 8 March 2012

Template:BlockSim Analytical Fault Tree Diagram Example

Let's assume that the three components A, B and C follow failure distributions Weibull(Beta=1.5,Eta=1000), Weibull(Beta=1.1, Eta=800) and Exponential(MTTF=3000). The reliability for each components and the system at mission time =100 hours is shown in the figure below.

OR gate Results.png

There are several plots available for analytic RBD and FT analysis. In system level, there are four plots available as show in the following:

Unreliability vs. Time
Unreliability VS Time.png


Reliability vs. Time
Reliability VS Time.png
Probability Density Function
PDF.png
Failure Rate vs. Time
Failure Rate VS Time.png

For the metrics, there are three kind of reliability importance plot available:

Reliability Importance vs. Time
Reliability Importance vs Time.png
Static Reliability Importance
Static Reliability Importance.png
Static Reliability Importance(Tableau)
Static Reliability Importance (Tableau).png

In block level, there are four kind of plots available:

Block Unreliability vs. Time
Block Unreliability vs. Time.png
Block Reliability vs. Time
Block Reliability vs. Time.png
Block Probability Density Function
Block Probability Density Function.png
Block Failure Rate
Block Failure Rate.png