Template:ReliaSoft's Alternate Ranking Method: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
 
(42 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{template:LDABOOK|4D|ReliaSoft's Alternate Ranking Method}}
#REDIRECT [[Appendix:_Special_Analysis_Methods#ReliaSoft_Ranking_Method]]
 
= ReliaSoft's Alternate Ranking Method (RRM) Step-by-Step Example=
This section illustrates the ReliaSoft ranking method (RRM), which is an iterative improvement on the standard ranking method (SRM). This method is illustrated in this section using an example for the two-parameter Weibull distribution. This method can also be easily generalized for other models.
 
Consider the following test data, as shown in the following Table B.1.
 
 
{|style= align="center" border="1"
|+Table B.1- The test data
!Number of Items
!Type
!Last Inspection
!Time
|-align="center"
|1||Exact Failure|| ||10
|-align="center"
|1||Right Censored|| ||20
|- align="center"
|2||Left Censored||0||30
|-align="center"
|2||Exact Failure|| ||40
|-align="center"
|1||Exact Failure|| ||50
|- align="center"
|1||Right Censored|| ||60
|- align="center"
|1||Left Censored||0||70
|- align="center"
|2||Interval Failure||20||80
|- align="center"
|1||Interval Failure||10||85
|- align="center"
|1||Left Censored||0||100
|}
 
 
==  Initial parameter estimation==
As a preliminary step, we need to provide a crude estimate of the Weibull parameters for this data. To begin, we will extract the exact times-to-failure: 10, 40, and 50 and append them to the midpoints of the interval failures: 50 (for the interval of 20 to 80) and 47.5 (for the interval of 10 to 85). Now, our extracted list consists of the data in Table B.2.
 
Using the traditional rank regression, we obtain the first initial estimates:
 
::<math>\begin{align}
  & {{\widehat{\beta }}_{0}}= & 1.91367089 \\
& {{\widehat{\eta }}_{0}}= & 43.91657736 
\end{align}</math>
 
 
{|style= align="center" border="1"
|+Table B.2- The Union of Exact times-to-failure with the "midpoint" of the interval failures
!Number of Items
!Type
!Last Inspection
!Time
|-
|1||Exact Failure|| ||10
|-
|2||Exact Failure|| ||40
|-
|1||Exact Failure|| ||47.5
|-
|3||Exact Failure||  ||50
|}
 
 
 
===Step 1===
For all intervals, we obtain a weighted ``midpoint'' using:
 
::<math>\begin{align}
  {{{\hat{t}}}_{m}}\left( \hat{\beta },\hat{\eta } \right)= & \frac{\int_{LI}^{TF}t\text{ }f(t;\hat{\beta },\hat{\eta })dt}{\int_{LI}^{TF}f(t;\hat{\beta },\hat{\eta })dt}, \\
  = & \frac{\int_{LI}^{TF}t\tfrac{{\hat{\beta }}}{{\hat{\eta }}}{{\left( \tfrac{t}{{\hat{\eta }}} \right)}^{\hat{\beta }-1}}{{e}^{-{{\left( \tfrac{t}{{\hat{\eta }}} \right)}^{{\hat{\beta }}}}}}dt}{\int_{LI}^{TF}\tfrac{{\hat{\beta }}}{{\hat{\eta }}}{{\left( \tfrac{t}{{\hat{\eta }}} \right)}^{\hat{\beta }-1}}{{e}^{-{{\left( \tfrac{t}{{\hat{\eta }}} \right)}^{{\hat{\beta }}}}}}dt} 
\end{align}</math>
 
 
This transforms our data into the format in Table B.3.
 
 
{|style= align="center" border="1"
|+Table B.3- The Union of Exact times-to-failure with the "midpoint" of the interval failures, based upon the parameters <math>\beta</math> and <math>\eta</math>.
!Number of Items
!Type
!Last Inspection
!Time
!Weighted "Midpoint"
|- align="center"
|1||Exact Failure||  ||10 ||
|-  align="center"
|2||Exact Failure||  ||40||
|-align="center"
|1||Exact Failure|| || 50||
|-align="center"
|2||Interval Failure||20||80||42.837
|-align="center"
|1||Interval Failure||10||85||39.169
|}
 
===Step 2===
 
Now we arrange the data as in Table B.4.
 
 
{|style= align="center" border="1"
|+Table B.4- The Union of Exact times-to-failure with the "midpoint" of the interval failures, in ascending order.
!Number of Items
!Time
|- align="center"
|1||10
|- align="center"
|1||39.169
|- align="center"
|2||40
|- align="center"
|2||42.837
|- align="center"
|1||50
|}
 
===Step 3===
 
We now consider the left and right censored data, as in Table B.5.
 
 
{|style= align="center" border="1"
|+Table B.5- Computation of increments, in a matrix format, for computing a revised Mean Order Number.
!Number of items
!Time of Failure
!2 Left Censored ''t'' = 30
!1 Left Censored ''t'' = 70
!1 Left Censored ''t'' = 100
!1 Right Censored ''t'' = 20
!1 Right Censored ''t'' = 60
|-
|1||10||<math>2 \frac{\int_0^{10} f_0(t)dt}{F_0 (30)-F_0 (0)}</math> ||<math>\frac{\int_0^{10} f_0 (t)dt}{F_0(70)-F_1(0)}</math> || <math>\frac{\int_0^{10} f_0(t)dt}{F_0(100)-F_0(0)}</math> || 0||0
|-
|1||39.169||<math>2 \frac{\int_{10}^{30} f_0(t)dt}{F_0(30)-F_0(0)}</math> ||<math>\frac{\int_{10}^{39.169} f_0(t)dt}{F_0(70)-F_0(0)}</math> ||<math>\frac{\int_{10}^{39.169} f_0(t)dt}{F_0(100)-F_0(0)}</math> || <math>\frac{\int_{20}^{39.169} f_0(t)dt}{F_0(\infty)-F_0(20)}</math>||0
|-
|2||40||0||<math>\frac{\int_{39.169}^{40} f_0(t)dt}{F_0(70)-F_0(0)}</math> || <math>\frac{\int_{39.169}^{40} f_0(t)dt}{F_0(100)-F_0(0)}</math> ||<math>\frac{\int_{39.169}^{40} f_0(t)dt}{F_0(\infty)-F_0(20)}</math> ||0
|-
|2||42.837||0|| <math>\frac{\int_{40}^{42.837} f_0(t)dt}{F_0(70)-F_0(0)}</math> || <math>\frac{\int_{40}^{42.837} f_0(t)dt}{F_0(100)-F_0(0)}</math>|| <math>\frac{\int_{40}^{42.837} f_0(t)dt}{F_0(\infty)-F_0(0)}</math>||0
|-
|1||50||0||<math>\frac{\int_{42.837}^{50} f_0(t)dt}{F_0(70)-F_0(0)}</math> ||<math>\frac{\int_{42.837}^{50} f_0(t)dt}{F_0(100)-F_0(0)}</math> || <math>\frac{\int_{42.837}^{50} f_0(t)dt}{F_0(\infty)-F_0(0)}</math>||0
|}
 
 
In general, for left censored data:
 
• The increment term for <math>n</math> left censored items at time <math>={{t}_{0}},</math> with a time-to-failure of .. when <math>{{t}_{0}}\le {{t}_{i-1}}</math> is zero.
 
• When <math>{{t}_{0}}>{{t}_{i-1}},</math> the contribution is:
<math>\frac{n}{{{F}_{0}}({{t}_{0}})-{{F}_{0}}(0)}\underset{{{t}_{i-1}}}{\overset{MIN({{t}_{i}},{{t}_{0}})}{\mathop \int }}\,{{f}_{0}}\left( t \right)dt</math>
or:
<math>n\frac{{{F}_{0}}(MIN({{t}_{i}},{{t}_{0}}))-{{F}_{0}}({{t}_{i-1}})}{{{F}_{0}}({{t}_{0}})-{{F}_{0}}(0)}</math>
where <math>{{t}_{i-1}}</math> is the time-to-failure previous to the <math>{{t}_{i}}</math> time-to-failure and <math>n</math> is the number of units associated with that time-to-failure (or units in the group).
 
In general, for right censored data:
 
• The increment term for <math>n</math> right censored at time <math>={{t}_{0}},</math> with a time-to-failure of <math>{{t}_{i}}</math>, when <math>{{t}_{0}}\ge {{t}_{i}}</math> is zero.
 
• When <math>{{t}_{0}}<{{t}_{i}},</math> the contribution is:
<math>\frac{n}{{{F}_{0}}(\infty )-{{F}_{0}}({{t}_{0}})}\underset{MAX({{t}_{0}},{{t}_{i-1}})}{\overset{{{t}_{i}}}{\mathop \int }}\,{{f}_{0}}\left( t \right)dt</math>
or:
<math>n\frac{{{F}_{0}}({{t}_{i}})-{{F}_{0}}(MAX({{t}_{0}},{{t}_{i-1}}))}{{{F}_{0}}(\infty )-{{F}_{0}}({{t}_{0}})}</math>
where <math>{{t}_{i-1}}</math> is the time-to-failure previous to the <math>{{t}_{i}}</math> time-to-failure and <math>n</math> is the number of units associated with that time-to-failure (or units in the group).
 
===Step 4===
 
Sum up the increments (horizontally in rows), as in Table B.6.
 
 
{|style= align="center" border="1"
|+Table B.6- Increments solved numberically, along with the sum of each row.
!Number of items
!Time of Failure
!2 Left Censored ''t''=30
!1 Left Censored ''t''=70
!1 Left Censored ''t''=100
!1 Right Censored ''t''=20
!1 Right Censored ''t''=60
!Sum of row(increment)
|-
|1||10||0.299065||0.062673||0.057673||0||0||0.419411
|-
|1||39.169||1.700935||0.542213||0.498959||0.440887||0||3.182994
|-
|2||40||0||0.015892||0.014625||0.018113||0||0.048630
|-
|2||42.831||0||0.052486||0.048299||0.059821||0||0.160606
|-
|1||50||0||0.118151||0.108726||0.134663||0||0.361540
|}
 
===Step 5===
 
Compute new mean order numbers (MON), as shown Table B.7, utilizing the increments obtained in Table B.6, by adding the ``number of items'' plus the ``previous MON'' plus the current ``increment.''
 
 
{|style= align="center" border="1"
|+Table B.7- Mean Order Numbers (MON)
!Number of items
!Time of Failure
!Sum of row(increment)
!Mean Order Number
|-
|1||10||0.419411||1.419411
|-
|1||39.169||3.182994||5.602405
|-
|2||40||0.048630||7.651035
|-
|2||42.837||0.160606||9.811641
|-
|1||50||0.361540||11.173181
|}
 
===Step 6===
 
Compute the median ranks based on these new MONs as shown in Table B.8.
 
 
{|style= align="center" border="1"
|+Table B.8- Mean Order Numbers with their ranks for a sample size of 13 units.
!Time
!MON
!Ranks
|-
|10||1.419411||0.0825889
|-
|39.169||5.602405||0.3952894
|-
|40||7.651035||0.5487781
|-
|42.837||9.811641||0.7106217
|-
|50||11.173181||0.8124983
|}
 
===Step 7===
 
Compute new <math>\beta </math> and <math>\eta ,</math> using standard rank regression and based upon the data as shown in Table B.9.
<br>
<br>
{|style= align="center" border="1"
!Time
!Ranks
|-
|10||0.0826889
|-
|39.169||0.3952894
|-
|40||0.5487781
|-
|42.837||0.7106217
|-
|50||0.8124983
|}
 
===Step 8===
 
Return and repeat the process from Step 1 until an acceptable convergence is reached on the parameters (i.e. the parameter values stabilize).
 
==Results==
The results of the first five iterations are shown in Table B.10.
Using Weibull++ with rank regression on X yields:
 
 
<br>
{|style= align="center" border="1"
|colspan="3" style="text-align:center;"|Table B.10-The parameters after the first five iterations
|-align="center"
|''Iteration''||<math>\beta</math>||<math>\eta</math>
|-align="center"
|1||1.845638||42.576422
|-align="center"
|2||1.830621 ||42.039743
|-align="center"
|3||1.828010 ||41.830615
|-align="center"
|4||1.828030 ||41.749708
|-align="center"
|5||1.828383 ||41.717990
|}
 
::<math>{{\widehat{\beta }}_{RRX}}=1.82890,\text{ }{{\widehat{\eta }}_{RRX}}=41.69774</math>
 
 
The direct MLE solution yields:
 
 
::<math>{{\widehat{\beta }}_{MLE}}=2.10432,\text{ }{{\widehat{\eta }}_{MLE}}=42.31535</math>

Latest revision as of 04:08, 10 August 2012

Redirect to:

Retrieved from "https://www.reliawiki.com/index.php?title=Template:ReliaSoft%27s_Alternate_Ranking_Method&oldid=30942"