Template:Standby with Delay (SCT Solution): Difference between revisions

Latest revision as of 09:23, 31 July 2012

Redirect to:

@@ Line 1: / Line 1: @@
-== SCT with delay ==
+#REDIRECT [[Example_Using_SCT_to_Analyze_Standby_with_Delay]]
-==== Purposes ====
-The purposes of this example is to illustrate how to apply SCT with delay.
-==== Description ====
-Three devices A, B and C are in parallel. 2 out of 3 are required to perform the task. Initially A and B are working, C is in standby status. If A or B fails, C will replace
-the failed one with some delay. After the failed device is restored, it will become a standby device. For example, If A fails, with 10 hours delay C will become active and replace A. After A is restored, it will become a standby device for B and C.
-==== BlockSim Solution ====
-The BlockSim modeling of this system is shown in Figure below.
-[[Image:SCT_with_delay_system.png|thumb|center|500px]]
-In order to model the delay, three extra blocks AA, BB and CC are added to the diagram.