Template:System with Two Standby Blocks (SCT solution): Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
 
(59 intermediate revisions by 6 users not shown)
Line 1: Line 1:
== Two Standby Blocks  ==
#REDIRECT [[Example_Using_SCT_to_Model_Two_Standby_Blocks]]
 
==== Purpose  ====
The purpose of this example is to illustrate how to model a system with two standby devices with SCT.
 
==== Statement ====
Assume that there are four devices A, B, C and D in the system. The system begins with A and B as active devices and C and D as standby devices. If one of the active device fails, one of standby device will be activated. After the active device is restored, it would become a standby device. For example, when A fails, C or D would be activated and become a active device. After A finishes repair, it would become a standby device.
 
==== BlockSim Solution====
It is easy to model this system with standby container. However, standby container has some limitations in other application. Here we want to model this system with SCT.
It is not possible to model this system directly with SCT. Here we present a alternative solution which can approximate this system.

Latest revision as of 09:31, 31 July 2012