Weibull++ Standard Folio Data CFM-Loglogistic: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:
|-
|-
| valign="middle" |
| valign="middle" |
Often, a group of products will fail due to more than one failure mode.
The objective of life data analysis is to fit a statistical distribution to failure time data in order to understand the reliability performance of a product over time or to make projections about future behavior. From the analysis, you can estimate several life characteristics, such as probability of failure, reliability, mean life or failure rate.|}
 
In order to begin analyzing data sets with more than one competing failure mode, one must perform a separate analysis for each failure mode. During each of these analyses, the failure times for all other failure modes not being analyzed are considered to be suspensions. This is because the units under test would have failed at some time in the future due to the failure mode being analyzed, had the unrelated (not analyzed) mode not occurred.  Thus, in this case, the information available is that the mode under consideration did not occur and the unit under consideration accumulated test time without a failure due to the mode under consideration (or a suspension due to that mode).
 
Once the analysis for each separate failure mode has been completed (using the same principles as before), the resulting reliability equation for all modes is the product of the reliability equation for each mode, or:
 
 
<math>R(t)={{R}_{1}}(t)\cdot {{R}_{2}}(t)\cdot ...\cdot {{R}_{n}}(t)</math>
 
 
where  <math>n</math>  is the total number of failure modes considered. This is the product rule for the reliability of series systems with statistically independent components, which states that the reliability for a series system is equal to the product of the reliability values of the components comprising the system.  In Weibull++ this life distribution can be either the 2-parameter Weibull, lognormal, normal or the 1-parameter exponential.
|}
{{Font|Learn more from...|11|tahoma|bold|gray}}
{{Font|Learn more from...|11|tahoma|bold|gray}}
{| border="0" align="left" cellpadding="0" cellspacing="3"
{| border="0" align="left" cellpadding="0" cellspacing="3"
|-
|-
| [[Image:Helpblue.png]]  
| [[Image:Helpblue.png]]  
| [http://help.synthesis8.com/weibull_alta8/competing_failure_modes_analysis.htm the help files...]
| [http://help.synthesis8.com/weibull_alta8/index.htm#weibull_standard_folios.htm the help files...]
|-
|-
| [[Image:Book blue.png]]  
| [[Image:Book blue.png]]  
Line 35: Line 24:
|-
|-
| [[Image:Bulbblue.png]]  
| [[Image:Bulbblue.png]]  
| [http://www.reliawiki.com/index.php/Template:CFM_Examples use example(s)...]
| [http://www.reliawiki.com/index.php/Temporary_needs_example_page use example(s)...]
|}
|}
<br>
<br>
Line 53: Line 42:
<br/>
<br/>
[[File:docedit.png|20px|right|link=http://www.reliawiki.com/index.php?title=Weibull%2B%2B_Standard_Folio_Data_CFM-Loglogistic&action=edit]]
[[File:docedit.png|20px|right|link=http://www.reliawiki.com/index.php?title=Weibull%2B%2B_Standard_Folio_Data_CFM-Loglogistic&action=edit]]
[[Category: Needs example]]

Revision as of 00:03, 22 March 2012

Webnotesbar.png
Standard Folio Competing Failure Modes-Loglogistic

The objective of life data analysis is to fit a statistical distribution to failure time data in order to understand the reliability performance of a product over time or to make projections about future behavior. From the analysis, you can estimate several life characteristics, such as probability of failure, reliability, mean life or failure rate.|} Learn more from...

Helpblue.png the help files...
Book blue.png the theory textbook...
Articleblue.png related article(s)...
Bulbblue.png use example(s)...
















Docedit.png