Weibull++ Standard Folio Plot ptContour

From ReliaWiki
Revision as of 16:00, 27 January 2012 by Nicolette Young (talk | contribs)
Jump to navigation Jump to search
Weibullworld.gif

Reliability Web Notes

Diagram Simulation Point Availability
BlockSim

Contour Plot

The Contour Plot allows you to display a 3-D surface on a 2-D plot. The plot represents the 3-D surface by plotting constant z slices, called contours, on a 2-D format. Think of it as looking down at the 3-D plot from above and the lines connecting the (x,y) coordinates are plotted at the position where a given z value occurs.

Contourplot1.png

In Weibull++, contour plots are typically used to compare data sets. You can use the overlay plot feature to superimpose two contour plots from two different data sets at the same confidence level in order to determine the level at which the two data sets are statistically different (to set up the plot, see Contour Plots). The data sets must be analyzed using the same distribution. In the example shown next, the two contour plots overlap at the 95% confidence level (outer rings). This means that the two data sets do not show a statistically significant difference at the 95% confidence level.

Contourplot2.png
Weibull++ Plots