WeibullDataSet Class

From ReliaWiki
Revision as of 23:46, 30 August 2013 by John Leavitt (talk | contribs)
Jump to navigation Jump to search



Instantiate this class to be able to fit a model from your raw data.

Constructors

  • Sub New Creates a new class that can be used to fit a model from Weibull raw data.



Properties

  • DatasetName Gets or set the name of the data set.
  • GeneralSettings General settings used when fitting the model or finding the best fit.
  • AnalysisSettings Settings used when fitting the model.
  • BestFitSettings Settings used when fitting the model or finding the best fit.
  • FittedModel Model, fitted from the raw data. See cModel class for the list of its methods below.
  • FailureCount Total number of failures in the data set.
  • SuspensionCount Total number of suspensions in the data set.




Events

  • WeibullEvents Reference to a class that contains overridable methods for handling Weibull solver events.
  • New WeibullEvents Reference to a class that contains overridable methods for handling Weibull solver events.



Methods

  • ClearDataSet Clears all data and fitted model. All analysis settings stay unchanged.
  • AddFailure Adds a failure data point to the collection of data points in the data set.
  • AddSuspension Adds a suspension data point to the collection of data points in the data set.
  • AddFailureInterval Adds a failure interval data point to the collection of data points in the data set.
  • AddSuspensionInterval Adds a suspension interval data point to the collection of data points in the data set.
  • AddFreeForm Adds a free-form data point to the collection of data points in the data set.
  • Calculate Fits a model from the raw data previously entered in the data set. Sets FittedModel property if successful. Clears it (sets to Nothing) in case of an error.
  • CalculateBestFit Finds the distribution that fits the data best. Sets FittedModel property if successful. Clears it (sets to Nothing) in case of an error.