Search results

...fly present three lifetime distributions commonly used in accelerated life test analysis: the exponential, the Weibull and the lognormal distributions. Not

<center><math>\overset{{}}{\mathop{\text{Test data}}}\,\,\!</math></center>

Degradation vs. Time (Log) plots the degradation of each test unit over time, using a logarithmic scale for time and degradation. A thick

Degradation vs. Time (Linear) plots the degradation of each test unit over time, using a linear scale for time and degradation. A thick hori

A manufacturer has tested prototypes of a modified product. The test was terminated at 2,000 hours, with only 2 failures observed from a sample ...sults. The estimated beta (<math>\beta\,\!</math>) parameters of the prior test results are as follows:

...design changes for the prototypes were delayed until after completing the test. The data set is given in the table below. Assume a fixed effectiveness fac

where ''TTT ''is the total test time and ''r'' is the number of failures.

*The chi-squared goodness-of-fit test results:

...:doe6_13.png|center|643px|Randomized complete block design for the mileage test using three blocks.|link=]] ...variation from one vehicle to the other. The statements for the hypothesis test are:

...e unit is observed or known. For example, if we had to compute the average test score for a sample of ten students, complete data would consist of the know ...ample, if we tested five units and only three had failed by the end of the test, we would have right censored data (or suspension data) for the two units t

...etween observed and model estimated probability for the Kolmogorov-Smirnov test. '''Boolean'''. Default value = True.

...jective. However, it is not unusual for a system to fail the demonstration test, and the management issue is what to do next. In both cases, important and ...effective reliability risk management is to not wait until the end of the test to have an assessment of the reliability performance.

...f a test statistic based on a random sample drawn from the population. The test statistic is then compared to the critical value(s) and used to make a deci The outcome of a hypothesis test is that we either ''reject'' <math>{{H}_{0}}\,\!</math> or we ''fail to rej

...ototype of a system was tested at the end of one of its design stages. The test was run for a total of 300 hours and 27 failures were observed. The table b

...Continuous Evaluation model is designed for analyzing data across multiple test phases, while considering the data for all phases as one data set. To perfo ...e test is also not predefined, and it can be continuously updated with new test data. This is the reason behind the name, "continuous evaluation."

...ng|"C:\RSRepository1.rsr11"}}) {{APIComment|'Replace with name and path to test repository.}}

#Military Handbook 781, Reliability Test Methods, Plans, and Environments for Engineering Development, Qualification #IEC International Standard, Reliability Growth- Statistical test and estimation methods, IEC 1164 International Electrotechnical Commission,

...clude>in the [[Logistic_Model_-_Missile_Launch_Test_Example|Missile Launch Test]] example</noinclude><includeonly>in the previous example</includeonly>. No

|+'''Cumulative Test Hours and the Corresponding Observed Failures for the Complex System''' !Cumulative Test Time(hours)

...methodology accomplishes this segregation based on the results of the life test.